Journal of Polymer & Composites Review Article Special issue Open Access

Design and Validation of Polymer-Separated Lithium-Ion Battery Powered Mini-UPS for Networking Applications

  1. Raju Chintakindil Department of Electrical & Electronics, Engineering, Vaagdevi College of Engineering, Warangal
  2. Prakash Kamisetti Department of Electrical & Electronics Engineering, Vaagdevi College of Engineering, Warangal

Abstract

Due to the growing use of semiconductor-based electronic devices in networking applications, power interruptions can cause data loss, productivity loss, and system disruptions. To eliminate these outages, Mini Uninterruptible Power Supplies are expensive and have single-use batteries with shorter battery lives. These networking wires, cables, and other electrical components are polymer-insulated. Polymers with low dielectric constants have the potential to improve antenna interlayer dielectrics, communication cables, and other hardware for high-speed wireless communication. Lithium-ion battery management systems use polyolefin separators. This study designs and validates a small, cost-effective, and efficient reusable power backup system for internet users with Wi-Fi routers, power grid monitoring security cameras, home electronics, and emergency medical equipment. This study looks at the basic ideas behind polymer-separated lithium-ion batteries. It covers things like operation theory, circuit analysis, charging and discharging modes, and electrochemical reactions. The work examines the operation of the constant current (CC) and constant voltage (CV)-controlled DC to DC Buck Converter XL4015 model Mini-UPS, the construction, functional diagram, and operational process of the DC-DC boost converter XL6019, as well as the circuit, operational diagrams, and Schottky diode requirements of the lithium-ion battery management system (BMS-2S). The proposed method entails designing a hardware-based, hands-on, prototype rechargeable battery management system-powered Mini-UPS and analyzing its performance in real-time applications.

Keywords

References (45)

  1. Han H, Liu H, Zuo X, Shi G, Sun Y, Liu Z, et al. Optimal Sizing Considering Power Uncertainty and Power Supply Reliability Based on LSTM and MOPSO for SWPBMs. IEEE Systems Journal. 2022;16(3):4013-4023. doi:10.1109/jsyst.2021.3137856
  2. Shariff SM, Alam MS, Ahmad F, Rafat Y, Asghar MSJ, Khan S. System Design and Realization of a Solar-Powered Electric Vehicle Charging Station. IEEE Systems Journal. 2020;14(2):2748-2758. doi:10.1109/jsyst.2019.2931880
  3. Chen Y, Wang W, Pagliari DJ, Macii E, Poncino M. Assessing the Impact of Sensor-Based Task Scheduling on Battery Lifetime in IoT Devices. IEEE Transactions on Instrumentation and Measurement. 2021;70:1-15. doi:10.1109/tim.2021.3088498
  4. Isidor Buchmann, “What is the Function of the Separator?,” Battery University.
  5. Haiyan Bao, “What is a Mini UPS for WiFi Router?,” LinkedIn.
  6. Wang L, Liu C, Shen S, Xu M, Liu X. Low dielectric constant polymers for high speed communication network. Advanced Industrial and Engineering Polymer Research. 2020;3(4):138-148. doi:10.1016/j.aiepr.2020.10.001
  7. Yang D, Ni Y, Kong X, Gao D, Wang Y, Hu T, et al. Mussel-inspired modification of boron nitride for natural rubber composites with high thermal conductivity and low dielectric constant. Composites Science and Technology. 2019;177:18-25. doi:10.1016/j.compscitech.2019.04.016
  8. Chen CH, Gu ZC, Tsai YL, Jeng RJ, Lin CH. Identification of the reaction mechanism between phenyl methacrylate and epoxy and its application in preparing low-dielectric epoxy thermosets with flexibility. Polymer. 2018;140:225-232. doi:10.1016/j.polymer.2018.02.045
  9. Industry ARC, “Wires & Cables (W&C) Polymer Compound Market - Forecast(2024 - 2030),” 2024.
  10. Atman, “Polymer for Electricity and electronics Applications,” Atman company.
  11. Ye J, Guo H, Wang B, Zhang X. Deep Deterministic Policy Gradient Algorithm Based Reinforcement Learning Controller for Single-Inductor Multiple-Output DC–DC Converter. IEEE Transactions on Power Electronics. 2024;39(4):4078-4090. doi:10.1109/tpel.2024.3350181
  12. Zhang J, Zhang Y, Zhou J, Wang J, Shi G, Cai X. Control of a Hybrid Modular Solid-State Transformer for Uninterrupted Power Supply Under MVdc Short-Circuit Fault. IEEE Transactions on Industrial Electronics. 2023;70(1):76-87. doi:10.1109/tie.2022.3153801
  13. IDTechEx, “Batteries, Supercapacitors, Alternative Storage for Portable Devices 2009-2019,” research@IDTechEx.
  14. Wikipedia, “Separator (electricity),” Encyclopedia.
  15. Li Y, Vilathgamuwa DM, Quevedo DE, Lee CF, Zou C. Ensemble Nonlinear Model Predictive Control for Residential Solar Battery Energy Management. IEEE Transactions on Control Systems Technology. 2023;31(5):2188-2200. doi:10.1109/tcst.2023.3291540
  16. Yuan D, Zhai H, Shen Y, Wang L, Chen A, Cheng Y. Si doping to passivate high-voltage medium‑nickel low-cobalt layered oxide cathode reactivity enabling longer life lithium-ion battery. Journal of Energy Storage. 2024;84:110944. doi:10.1016/j.est.2024.110944
  17. Editorial Team, “What is a Lithium-Ion Battery?,” Everything PE, 2023.
  18. Carlos M. Costa at al., “Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications,” RSC Adv., p. 29, 2013.
  19. Tancin RJ, Özdoğru B, Dutta NS, Finegan DP, Tremolet de Villers BJ. Direct reuse of graphite and lithium nickel manganese cobalt oxide (NMC) recovered from ultrafast-laser ablation debris in Li-ion battery electrodes. Journal of Power Sources. 2024;596:234027. doi:10.1016/j.jpowsour.2023.234027
  20. Luo YH, Wei HX, Tang LB, Huang YD, Wang ZY, He ZJ, et al. Nickel-rich and cobalt-free layered oxide cathode materials for lithium ion batteries. Energy Storage Materials. 2022;50:274-307. doi:10.1016/j.ensm.2022.05.019
  21. Rajkamal A, Sharma A, Pullagura BK, Thapa R, Kim H. Engineering lithium nickel cobalt manganese oxides cathodes: A computational and experimental approach to bridging gaps. Chemical Engineering Journal. 2024;481:148223. doi:10.1016/j.cej.2023.148223
  22. Sinafar B, Badamchizadeh MA, Kharrati H, Baradarannia M. Current sharing and voltage regulation of parallel DC–DC buck converters: Switching control approach. ISA Transactions. 2023;140:490-502. doi:10.1016/j.isatra.2023.05.022
  23. Ye J, Guo H, Wang B, Zhang X. Deep Deterministic Policy Gradient Algorithm Based Reinforcement Learning Controller for Single-Inductor Multiple-Output DC–DC Converter. IEEE Transactions on Power Electronics. 2024;39(4):4078-4090. doi:10.1109/tpel.2024.3350181
  24. Besharati Rad A, Kargaran M, Meghdadi M, Medi A. A Wide-Input-/Output-Voltage-Range Buck Converter With Adaptive Light-Load Efficiency Improvement and Seamless Mode Transition. IEEE Transactions on Power Electronics. 2024;39(2):2200-2212. doi:10.1109/tpel.2023.3336872
  25. Daniel Stoecker, “Pasta Bolognese and induction cooktops,” LinkedIn Corporation.
  26. Xiang Y, Chung HSH, Lin H. Light Implementation Scheme of ANN-Based Explicit Model-Predictive Control for DC–DC Power Converters. IEEE Transactions on Industrial Informatics. 2024;20(3):4065-4078. doi:10.1109/tii.2023.3319654
  27. Saadaoui A, Ouassaid M. Super-twisting sliding mode control approach for battery electric vehicles ultra-fast charger based on Vienna rectifier and three-phase interleaved DC/DC buck converter. Journal of Energy Storage. 2024;84:110854. doi:10.1016/j.est.2024.110854
  28. Wikipedia, “Seven-segment display,” Wikipedia. Wikimedia Foundation, Inc., 2024.
  29. Debashis Das, “DC to DC Converter with Constant Current (CC) and Constant Voltage (CV) Control,” Circuit Digest.
  30. Wan-Rone Liou, Mei-Ling Yeh, Yueh Lung Kuo. A High Efficiency Dual-Mode Buck Converter IC For Portable Applications. IEEE Transactions on Power Electronics. 2008;23(2):667-677. doi:10.1109/tpel.2007.915047
  31. Farajdadian S, Hajizadeh A, Soltani M. Recent developments of multiport DC/DC converter topologies, control strategies, and applications: A comparative review and analysis. Energy Reports. 2024;11:1019-1052. doi:10.1016/j.egyr.2023.12.054
  32. XLSEMI, “5A 180KHz 36V Buck DC to DC Converter,” 2023.
  33. Vázquez N, Vaquero J. Inverters. Power Electronics Handbook. 2024:293-343. doi:10.1016/b978-0-323-99216-9.00001-9
  34. Pentalogix, “Materials used in printed circuit board substrates,” Pentalogix Inc.
  35. R. Craze, “XL6019 DC-DC 5A Adjustable Boost Power Supply Module,” Robo Craze.
  36. Robu, “XL6019 DC-DC 5A Adjustable Boost Power Supply Module,” © Robu.in.
  37. Janik, “Find inductor for XL6019 circuit boost converter,” Stack Exchange Inc.
  38. Radilocman, “Datasheet XL6019 - 3,” XLSEMI.
  39. Xiong R, Wang S, Takyi-Aninakwa P, Jin S, Fernandez C, Huang Q, et al. Critical Review on Improved Electrochemical Impedance Spectroscopy-Cuckoo Search-Elman Neural Network Modeling Methods for Whole-Life-Cycle Health State Estimation of Lithium-Ion Battery Energy Storage Systems. Protection and Control of Modern Power Systems. 2024;9(2):75-100. doi:10.23919/pcmp.2023.000234
  40. Kumar RR, Bharatiraja C, Udhayakumar K, Devakirubakaran S, Sekar KS, Mihet-Popa L. Advances in Batteries, Battery Modeling, Battery Management System, Battery Thermal Management, SOC, SOH, and Charge/Discharge Characteristics in EV Applications. IEEE Access. 2023;11:105761-105809. doi:10.1109/access.2023.3318121
  41. E. Fahad, “BMS Battery Management System explained,” Electronic Clinic.
  42. Han J, Yuan C, Long J, Wu J, Lin M. An Ultrasonic Reflected Wave-Based Method for Estimating State of Charge of Hard-Shell Lithium-Ion Batteries. IEEE Transactions on Instrumentation and Measurement. 2024;73:1-11. doi:10.1109/tim.2024.3370780
  43. AL-Oqla FM, Sapuan SM, Fares O. Electrical–Based Applications of Natural Fiber Vinyl Polymer Composites. Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites. 2018:349-367. doi:10.1016/b978-0-08-102160-6.00018-4
  44. ADCPOWER, “Lithium battery 10000mah mini ups for wifi router modem monitoring DC 5V 9V 12V router uninterruptible power supply,” Adcfiberpower.
  45. Fuji Electric, “UPS Sizing Calculation,” Fuji Electric India.
Support