Journal of Electronic Design Technology
Stability Analysis in SRAM Cell for Deep Submicron Design
Abstract
AbstractMemory is an integral part of present day battery operated and hand held electronic gadgets. As the size of devices shrinks so does the size of memory used in these devices also, this increases the demand for low power devices. Leakage current is one of the prominent factors that contribute to significant portion of the total power dissipation; in fact at lower technologies it becomes comparable to switching component. Device scaling also affects various electrical parameters like noise voltage and cell stability. The static noise margin (SNM) of cell greatly determines its stability. To address upon this issue various techniques have been proposed at various levels of design cycle. This paper analyzes SNM for 6T SRAM cell with respect to various parameters like cell ratio (CR), pull-up ratio (PR), supply voltage (Vdd), data retention voltage (DRV) and temperature. It also analyzes the variation of read static noise margin (RSNM) and writes static noise margin (WSNM) with the variation in Vdd. simulations are carried out using cadence virtuoso tool in 90 nm and 45 nm technology.Keywords: SRAM, Static Noise Margin, DRV, CR, PR, RSNM, WSNMCite this ArticleTripti Tripathi, D.S. Chauhan, S.K. Singh. Stability Analysis in SRAM Cell for Deep Submicron Design. Journal of Electronic Design Technology. 2018; 9(2): 1–6p.References (19)
- Seevinck E et al. Static-noise margin analysis of MOS SRAM cells. IEEE J. Solid-State Circuits. 1987; SC -22 (2): 748–754p.
- Grossar E. Read stability and write -ability analysis of SRAM Cells for nanometer technologies. IEEE Journal of Solid -State Circuits. 2006; 41 (11): 2577–2588p.
- Rahman N et al. Static -noise-margin analysis of modified 6T SRAM cell during read operation. Int. J. on Recent Trends in Engineering and Technology . 2013; 8 (2): 47–51p. Stability Analysis in SRAM Cell for Deep Submicron Design Tripathi et al. JoEDT (2018) 1-6 © STM Journals 2018. All Rights Reserved Page 6
- Takeda Koichi et al. A read -static-noise- margin-free SRAM cell for Low-VDD and high-speed applications. IEEE Journal of Solid-State Circuits . 2006; 41 (1): 113 – 121p.
- Alorda B et al . Static and dynamic stability improvement strategies for 6T CMOS low -power SRAMs. Design, Automation & Test in Europe Conference & Exhibition (DATE), April 2010.
- Suzuki M et al. Improvement of static noise margin in SRAM by post-fabrication self-convergence techni que. International conference on Semiconductor Device Research Symposium (ISDRS’09) , March 2011.
- Kaushik N et al. Low power and enhanced noise margins SRAM using novel asymmetric FinFETs. International Conference on Communication Systems and Network Technologies (CSNT), 2012.
- Madiwalar B et al. Single bit -line 7T SRAM cell for low power and high SNM. International Multi -Conference on Automation, Computing, Communication, Control and Compressed Sensing (iMac4s), March 2013.
- Shekhar S et al. New improved low power and high SNM single metal SRAM in 32 nm technology. International Conference on Computer Communication and Informatics(ICCCI), Jan. 2014.
- Dhilleswararao P et al. High SNM 32 nm CNFET based 6T SRAM Cell design considering transistor r atio. International Conference on Electronics and Communication Systems (ICECS), Feb. 2014.
- Pasandi G et al. A new low -power 10T SRAM cell with improved read SNM. International Journal of Electronics . 2015; 102 (10): 1621–1633p.
- Kumar S et al. Power, energy and SNM optimization of 6TSRAM cell using power gating technique. Fifth International Conference on Communication Systems and Network Technologies (CNST), April 2015.
- Krathika S et al. Power analysis of bit interleaving 9T SRAM array. 3rd International Conference on Devices, Circuits and systems (ICDCS), March 2016.
- Ahmad S et al. Single-ended Schmitt - trigger-based robust low -power SRAM cell. IEEE Transactions on Very Large Scale Integration (VLSI) Systems . 2016; 24 (8): 2634–2642p.
- Nayak D et al. Current starving the SRAM cell: a strategy to improve cell stability and power. Journal of Circuits, Systems and Signal Processing . 2016; 36 (8): 3047–3070p.
- Manna A et al. Improved read noise margin characteristics for single bit line SRAM cell using adiabatically operated word line. International Conference on Nextgen Electronic Technologies: Silicon to software (ICNETS2), Oct. 2017.
- Singh SK et al. Characterization of 6T SRAM cell DRV for ULP applications. International Journal of Computer Applications. 2013; 72 (20).
- Qin Huifang et al. Standby supply voltage minimization for deep sub -micron SRAM. Microelectronics Journal. 2005; 36: 789 – 800p.
- Benton et al. Static noise marg in variation for sub-threshold SRAM in 65 nm CMOS. IEEE Journal of Solid -State Circuits. 2006; 41: pp. 1673–1679p. Cite this Article Tripti Tripathi, D.S. Chauhan, S.K. Singh . Stability Analysis in SRAM Cell for Deep Submicron Design . Journal of Electronic Design Technology. 2018; 9(2): 1–6p.