XRD
69 articles · search the full text for this term
-
Effect of the Annealing Temperature on CdS Nanoparticles Synthesized by Chemical Precipitation Technique and also Characterized for its Potential Technological Applications
Abstract: Cadmium Sulfide (CdS) nano particles are synthesized by chemical precipitation method. Cadmium Chloride and Thiourea are used as the precursor materials. Ammonia water & distilled water are used as solvent. The samples are annealed at 100°C, 300°C and 500°C for 1 hour. Transmission electron microscopy (TEM), Energy–dispersive X-ray spectroscopy (EDAX), and X-ray diffraction pattern (XRD) are used to study the morphologies, distribution, and crystallinity of the CdS nanoparticles and to …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 23, Issue 3, 2021 · pp. 20–28 Read article
-
Preparation and Characterization of Multifunctional Ferrite Nanoparticles for Photocatalytic Applications
Abstract: Ferrite is having both electrical and magnetic properties. Now a days it has importance as a technological material. A review of ferrite study regarding science and technology of ferrite by different scientists is presented in this paper. The history and applications of ferrites are explained by various illustrations. It gives an overview of ferrites as a nano particle. It presents a broad overview of ferrite research, from bulk to nanoscale …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 38–42 Read article
-
Structural Studies on Glass Fiber Reinforced Poly-styrene Composites
Abstract: Polymers are used in various industries and majorly in aerospace and automobile industry where in fuel efficiency is a big challenge. Polymers are lightweight hence by volume they make up 50% of a new vehicle but by weight it is less than 10%. Current economic and environmental concerns make the creation of more fuel-efficient cars a top priority in the automotive industry. Hence the study of these polymers becomes very …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 32–38 Read article
-
Evaluation of Crystallinity in Talc/Poly-styrene Composites by using FTIR and XRD
Abstract: Over the decade, polymers have found their usage in almost all types of industries ranging from food and beverage packaging to automobile industries. Though the polymers are considered highly inert and chemically stable, their performance under mechanical loading is not at par with their metallic counterparts. Thus, polymer composites have started gaining popularity over the years, but their properties are poorly understood. In this study, the effect of talc addition …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 10–16 Read article
-
Mirabilis Jalapa Flower Extract as Natural Food Dye and Green Cellular Delivery of Nanoparticles
Abstract: Use of artificial colouring agents in sweets and packed food has become a common scenario now a day, which pose serious consequences in consumers especially children. Various studies around the globe reported the serious health hazards of artificial food dyes which include organ damage of liver, kidney and lungs thereby affecting metabolic enzymes, serum creatine and urea levels and brain damage resulting in neurotoxicity and even behavioural deficits in children. …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 8, Issue 2, 2023 · pp. 27–34 Read article
-
Synthesis and Characterization of Bamboo-Supported Nano Zerovalent Iron (NZVI-AB) for Cr(VI) Sequestration
Abstract: Remediation of chromium contaminated sites present both technological and economic challenges, as conventional methods are often too expensive and difficult to operate. In this study, bamboo supported Zero-valent iron (Fe0) nanoparticles were synthesized, characterized, and were tested for removal of Cr(VI). Fe0 nanoparticles were synthesized by the reduction of ferric chloride with avocado polyphenols and characterized by FTIR (Fourier transform infrared) spectroscopy and XRD (X-ray diffraction). Batch experiments were performed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 1–7 Read article
-
The Formation of Bi-2223 Superconductor with Fe-Substitution
Abstract: Presently, we have studied about synthesis and characterization of Bi-2223 Superconductors in the form of Bi2Sr2Ca3(Cu0.97Fe0.03)3O10+δ complex. The sample was established with solid state method and characterized by XRD, (FESEM) and (FTIR). The DC electrical resistivity of the sample was measured at liquid helium temperature. The XRD parameters shows the orthorhombic structure with lattice constant a = 5.7429Å, b = 5.0845 Å, c = 36.5569 Å and grain size confirm …
Published in Research & Reviews : Journal of Physics · Vol. 9, Issue 2, 2020 · pp. 32–41 Read article
-
Solar Energy Materials Synthesis and Characterization
Abstract: The studies on the structural, microstructure and composition of the MoSe2 films are discussed in this research work. It deals with the optical properties of pulse plated films of MoSe2. Very little information has been given in the literature concerning the deposition current efficiency using pulse plating. In agreement with pulse plating theory, according to reference, the limiting overall plating rate of materials generally does not exceed the values for …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 6, Issue 3, 2019 · pp. 24–37 Read article
-
Doping of Cerium, Boron and Sulphur with ZnO Nanoparticles and their Impact on Lattice Parameters, Studied through UDM Model
Abstract: Un-doped and tri-doped ZnO nanoparticles were successfully synthesized by the simple sol-gel method. Tri-doped nanoparticles of ZnO were prepared by using Ce, B and S as a dopant in concentrations of 1, 2 and 4 wt% with respect to ZnO. The effect of Ce, B and S on the ZnO nanoparticles was investigated by using X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) techniques against particles …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 1, 2017 · pp. 21–28 Read article
-
Effect of Spray Pyrolysis on the Properties of Chemically Sprayed CuO:Al Thin Films
Abstract: AbstractCuO:Al thin films were grown from 50 ml of spray solution on glass substrates by chemical spray at Ts=400°C using solution spray doping percentages of 0, 4, 5 and 6%. Copper acetate and aluminium chloride were used as Cu and Al sources, respectively. Independent of solution spray rate, the crystallites in CuO:Al films grow preferentially in the (201) plane, parallel to the substrates. The spray pyrolysis solution are using different …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Structural, Mechanical, Electrical and Magnetic Properties of Mn–Zn Substituted Ca-hexaferrites
Abstract: In the present investigation, the samples with chemical composition Ca(CoTi)0.5(MnZn)x/2Fe11–xO19 with (x = 0 to 1.0) have been synthesized using perfect stoichiometric proportions of reacting oxides by standard ceramic technique. The pellets of 15 mm diameter were prepared and sintered at 1313 K in air atmosphere for 106 h and characterized by using XRD and SEM. XRD studies of the samples showed hexagonal magnetoplumbite (M) structure with unit cell dimensions …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 99–111 Read article
-
Synthesis and Characterization of Ta Doped Nanostructured PZT
Abstract: Lead Zirconate Titanate (PZT) powder of composition Pb(Zr0.65Ti0.35)O3 was modified by incorporation of Tantalum (Ta5+) in a wide composition range (5–25 at%) by chemical co-precipitation method using PbO, Zr2O3, TiO2 and Ta2O5. X-ray diffraction patterns of the samples showed the formation of a single phase and confirmed the formation of a rhombohedral phase of all the samples after sintering. SEM analysis showed well-developed, uniformly packed grains. Both the linear particle …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 41–48 Read article
-
Study on GP Zones Formation in the Sc Inoculated Ternary Al-Zn-Mg Alloys
Abstract: Mostly, ternary Al-Zn-Mg (7075) alloys are used in automotive and aerospace engineering due to readily age-hardening response and high specific strength-to-density ratio. Scandium (Sc) has great inoculation effect in Al-Zn-Mg alloys. The cast Al-Zn-Mg alloys system undergoes a complex transition sequence in order to gain maximum strength. This sequence consists of solutionizing then immediate quenching in water (T4), natural ageing and artificial ageing (T6); usually, in several temperature steps to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 2, 2016 · pp. 53–69 Read article
-
Biosynthesis, Characterization and Antibacterial Studies of Silver Nanoparticles from Tamil Nadu Major Crop Anacardium occidentale
Abstract: Recent studies have shown that Silver Nanoparticles have physical, optical and catalytic properties. Present work involves the eco-friendly and reproducible synthesis of Silver Nanoparticles from the Anacardium occidentale leaves extract. The synthesized silver Nanoparticle from 1 mM AgNO3 solution through the leaf extract were characterizing was monitored using Ultraviolet-visible (UV-vis) spectrophotometer, Scanning electron microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), X-ray powder diffraction (XRD) and Fourier transform infra-red spectroscopy (FT-IR).Scanning …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 20, Issue 3, 2018 · pp. 13–22 Read article
-
Effect of Microwave Energy on Titania Doped YSZ
Abstract: Today, Solid State Oxide Fuel Cells (SOFCs) have become a need of the hour owing to higher efficiency, low emissions and versatile applications. Various materials are being explored to increase its performance and long-term stability, especially at high temperatures. Though YSZ has been the state of art anode material, YZT is emerging as a future material under consideration. Theundoped YSZ and the doped YSZ, i.e. 5 mol% YZT, calcined and …
Published in Research & Reviews : Journal of Physics · Vol. 7, Issue 3, 2018 · pp. 51–55 Read article
-
Oxidation Behaviour of Plasma Sprayed Carbon Nanotubes-Alumina Coated ASME-SA213-T291 Boiler Tube Steel
Abstract: In this research work, oxidation behaviour of Carbon Nanotubes reinforced Al2O3 coated ASME-SA213-T91 boiler tube steel specimens were investigated at 900°C temperature in air. The different CNTs-Alumina composite coatings were deposited using plasma spray technique and NiCr was used as bond coat before applying CNTs-Al2O3 coatings. The hot corrosion studies were conducted on all coated specimens in air at 900°C under cyclic conditions. The thermogravimetric technique was used to establish …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 1–15 Read article
-
Corrosion Behaviour of CNT-Alumina Coated T22 Boiler Steel in Na2SO4-60% V2O5 Environment at 900°C Temperature
Abstract: In this research work, carbon nanotubes reinforced Al2O3 coated ASME-SA213-T22 boiler tube steel was investigated for high temperature corrosion behaviour in molten salt environment at 900°C temperature. The coatings were deposited using plasma spray technique and NiCr was used as bond coat before applying CNTs-Al2O3 coatings. The thermogravimetric technique was used to establish kinetics of corrosion. X-ray diffraction (XRD) and scanning electron microscopy/energy-dispersive x-ray analysis (SEM/EDAX) techniques were used to …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 8, Issue 3, 2017 · pp. 1–16 Read article
-
Study of Microstructural and Mechanical Properties of YSZ and YSZ/Al2O3 Nanopowders Synthesized by Solution Combustion Method
Abstract: AbstractIn the present work different compositions of nanocrystalline tetragonal zirconia stabilized with yttrium oxide (YSZ) have been produced by solution combustion route. Same compositions of YSZ with alumina doping have also been prepared by similar method. The nanopowders obtained are characterized by various characterization techniques like XRD, FTIR, SEM and Wilson Hardness testing techniques. XRD and FTIR analysis confirmed the tetragonal phase of calcined YSZ sample. The particle sizes are …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 2, 2017 · pp. 8–17 Read article
-
Influence of Dip Cycles on the Structural, Optical and Morphological Properties of CdS-SILAR Deposited Thin Films
Abstract: Cadmium sulphide (CdS) thin films were deposited on a glass substrate by a relatively simple and cost effective successive ionic layer adsorption and reaction (SILAR) method at temperature 80ºC at different deposition cycles. For a fine nanocrystalline thin film growth, the parameters include concentrations of cationic and ionic precursors, number of immersion cycles, and the immersion time. A study was made to know how dip cycles affects the structural, surface …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 6, Issue 3, 2016 · pp. 19–26 Read article
-
Characterization of Mn Dopped SrAlO Nano-Phosphors Prepared via Sol-Gel Method
Abstract: Strontium aluminate with Mn dopped phosphor was synthesized by Sol-Gel method using Strontium Acetate, Aluminium Acetate as raw material and 2-methoxyethanol as complexing agent. The transparent sol was preheated at 100°C for 2 h and then the precursor was finally annealed at 950°C for 2 h. The phosphor emits luminescence with peak wavelength at 395 nm and 520 nm under near-ultraviolet excitation at 360 nm. The morphology, composition and structure …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 6, Issue 3, 2016 · pp. 5–10 Read article