Surface roughness
16 articles · search the full text for this term
-
Investigating the Influence of Process Parameters on Photochemical Machining of Phosphor Bronze Alloy Microchannels
Abstract: Microchannels are widely employed in microfluidic devices, biomedical systems, and compact heat exchangers, where their functional efficiency depends strongly on surface finish, dimensional control, and edge quality. Traditional machining techniques often face limitations in producing such features with the required precision, prompting the use of advanced micromachining methods. In the present work, photochemical machining (PCM) has been applied to fabricate serpentine-shaped microchannels in phosphor bronze. The study systematically investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 837–846 Read article
-
Optimization of Machining Parameters of EN-27 Material Using Wire Electric Discharge Machining (WEDM)
Abstract: The optimization of Wire Electrical Discharge Machining (WEDM) parameters for EN-27 alloy steel, a high-strength material widely utilized in mechanical and structural applications, is the subject of this study's methodical analysis. Due to its hardness and poor machinability by conventional methods, WEDM is preferred for achieving precise dimensional accuracy and surface integrity. The primary objective of this work is to enhance machining performance by identifying optimal process parameters influencing Material …
Published in Journal of Production Research & Management · Vol. 16, Issue 1, 2026 · pp. 32–36 Read article
-
Post-Treatment Methods in Additive Manufacturing: A Review of Mechanical, Thermal, Chemical, and Hybrid Approaches
Abstract: Additive manufacturing, particularly Fused Deposition Modeling (FDM), has become a cornerstone of rapid prototyping and functional part production due to its accessibility and material versatility. However, the inherent layer-by-layer nature of FDM introduces surface roughness, reduced mechanical strength, and anisotropic behavior, which limit its industrial applications. This literature review investigates the impact of chemical post-processing treatments such as solvent vapor smoothing, immersion, and hybrid chemical-thermal methods on the surface quality …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 25–34 Read article
-
Enhancing Surface Roughness of Polylactic Acid (PLA) 3D-Printed Parts Using CO₂ Laser Scanning: An Experimental Study on Parameter Optimization
Abstract: Fused deposition modeling (FDM) of polylactic acid (PLA) often suffers from poor surface finish due to the inherent layer-by-layer deposition process, limiting its use in high-precision applications. This study investigates CO₂ laser scanning as an efficient post-processing technique to reduce the surface roughness (Ra) of PLA parts while maintaining structural integrity. Specimens (100 × 80 × 5 mm) were fabricated with varying infill densities (35%, 70%, and 100%) to assess …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 503–511 Read article
-
A review on Methodology used for Dry Turning of AISI 52100 Steel
Abstract: Bearing steel like AISI 52100 is one of the most widely used high cutting steel in industry for manufacturing of bearing. A large amount of coolant is used for machining at high speed due to which increase there has been a significant increase in environmental hazards. So Green or Dry manufacturing with optimize cutting parameters and its effect on tool material & work piece quality need to be studied to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 467–475 Read article
-
Optimization of Turning Process Parameters by Genetic Algorithm Approach
Abstract: In this research, turning parameters were optimized through a genetic algorithm for the purpose to minimize surface roughness and to maximize the material removal rate. High finish quality is guaranteed through minimum surface roughness, and efficient process planning is facilitated through maximum material removal rate optimization. For predicting surface roughness and material removal rate with respect to spindle speed, feed rate, and depth of cut, the empirical models were developed …
Published in Journal of Production Research & Management · Vol. 15, Issue 1, 2025 · pp. 33–41 Read article
-
Experimental Investigations of EDM Parameters on Machining Square Blind Holes in Maraging Steels
Abstract: Square blind holes have certain qualities that make them useful in fields where accuracy and efficiency are crucial, like aerospace, automotive, molding, and general manufacturing industries where structural integration is required in precise assembly. It is challenging to machine square blind holes with traditional machining due to geometrical complexity as precision is required for sharp corners which is difficult to get at the corners due to tool wear. Electrical discharge …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 390–397 Read article
-
Enhancing Performance of Hybrid Natural Fiber Reinforced Polymer: Insights into Processing, Characterization and Machining
Abstract: Natural fibre reinforced polymer composites (N-FRP) have gained popularity in recent years as an alternative to regular polymer composites, owing to growing environmental concerns. Natural fibers are becoming increasingly popular due to their outstanding properties such as flexibility, strength, compatibility with living creatures, and impact resistance. A notable application of natural fibers is in the medical industry, with the goal of producing cost-effective, sustainable, and long-lasting products. Combining different fibers …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 139–153 Read article
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Experimental Study of Roughness Analysis of AISI 316L Material using Fiber and CO2 LBM
Abstract: Laser beam machines have gained significant attention as a precise and versatile method for cutting and shaping materials in various industries. This study investigates the surface roughness characteristics of SS 316L, a commonly used stainless steel, when subjected to laser beam machining using both fiber and CO2 laser sources. The aim of this research is to compare the effects of these two laser types on the final surface finish of …
Published in International Journal of Solid State Innovations & Research · Vol. 2, Issue 2, 2024 · pp. 12–21 Read article
-
An Experimental Investigation on Surface Roughness of Laser Beam Machining of Aluminium Alloy
Abstract: Laser beam machining (LBM) is a cutting-edge technique widely utilized for precision machining of advanced materials. This experimental investigation focuses on the surface roughness of aluminum alloy (Al 6061) during LBM. The study systematically examines the impact of process parameters such as laser power, cutting speed, and gas pressure on surface roughness (Ra). The significance of surface roughness in determining the quality and functionality of machined components is emphasized. The …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 82–104 Read article
-
Fluidic Engineering: Investigating Cutting Fluids’ Effect on Machined Surface Roughness
Abstract: The primary goal of this experimental study project is to determine the optimal cutting fluid by experimenting with two distinct oil kinds and compositions. Thirty-six compositions of cutting oil are obtained by mixing three distinct oil compositions, such as mineral oil and paraffin oil, with six different additive and anti-foaming agent compositions. Then, using a trial-and-error methodology, we employed these 36 cutting oil compositions for drilling operations with constant pressure …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 1, 2024 · pp. 27–42 Read article
-
Application of Artificial intelligence in Single Point Incremental Forming for Surface Roughness Prediction
Abstract: The sheet metal forming industries always try to find an emerging trend to form sheet-metal in a cost-effective manner. In this regard, a forming technique is trending termed as single point incremental forming (SPIF) in which a simple forming tool having hemispherical end rod is moving and simultaneously deforming the clamped metal sheet according to predetermined toolpath command and forms a complete shape. The achievement of required surface quality is …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 237–246 Read article
-
Integration of Taguchi and MCDM Techniques for the Optimization of Experimental Parameters in Electrical Discharge Machining: A Research
Abstract: Electric discharge machining (EDM) represents a non-conventional approach to machining, particularly beneficial for processing hard-to-machine materials or components with high length-to-diameter ratios or intricate shapes. Widely employed across various industries such as automotive, chemical, aerospace, biomedical, and tool and die, EDM offers a unique method for achieving precise shapes and dimensions. Unlike traditional machining methods where form is attained through the interaction of the tool and workpiece, EDM operates without …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 6–14 Read article
-
Performance Evaluation of Eco-friendly Cutting Fluid in Machining Process—An Approach towards Environmentally Friendly Production
Abstract: The machining industry's evolving environmental consciousness has prompted a growing demand for cutting fluids devoid of chlorine and sulphur, thus fostering sustainable machining practices. This surge in demand is driven by mounting apprehensions over environmental contamination and worker safety. As the industry transitions to modern cutting fluids, it becomes imperative to comprehend their effectiveness and the optimal machine parameters required for their deployment in the turning process. In our current …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 149–160 Read article
-
Optimum Machining Parameters for Al 7075 Hybrid Metal Matrix Composites Using Multi-objective Optimization Technique and the Modified Taguchi Approach
Abstract: Lightweight composite materials with improved mechanical properties are widely used in industries. There is a need to obtain optimum machining parameters of such hybrid composites. This paper uses reliable multi-objective optimization technique and modified Taguchi approach to determine optimal machining parameters such as speed (NS) varying from 1000 rpm to 1500 rpm, feed rate (FR) from 0.10 mm/rev to 0.20 mm/rev, depth-of-cut (DC) varied from 0.5 mm to 1.5 mm …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 269–278 Read article