Microstrip patch antenna
15 articles · search the full text for this term
-
High-Gain Microstrip Patch Antenna for Satellite and Radar Applications
Abstract: The growing demand for high-speed wireless communication, satellite connectivity, and advanced radar systems has increased the necessity for compact and high-performance antenna designs. This study presents the design and analysis of a high-gain microstrip patch antenna intended for satellite and radar applications operating in the microwave frequency range. The proposed antenna structure is developed using a low-loss dielectric substrate to enhance radiation efficiency, bandwidth, and gain characteristics while maintaining a …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 2, 2026 Read article
-
Optimized Rectangular Microstrip Patch Antenna for Wireless Communications
Abstract: The design is for a microstrip patch antenna that is rectangular. The wireless local area network [WLAN] resonance frequency of the suggested antenna is 2.4GHz. The antenna's frequency selection has made it ideal for use in wireless local area networks, or WLANs. The antenna design is optimised using the optometric feature of the High Frequency Structure Simulator software (HFSS) to increase the accuracy and efficiency of the suggested antenna. HFSS …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 12, Issue 1, 2025 · pp. 37–47 Read article
-
Performance Enhancement of Microstrip Patch Antenna Using Metasurface
Abstract: Performance enhancement of microstrip patch antenna using metasurface provides a thorough analysis of how a metasurface integration technique might improve the performance of a microstrip patch antenna. The 4×4 array of square components metasurface measuring 51.6 × 51.6 × 3.1016 mm is merged with the microstrip patch antenna, which has dimensions A=13.5 mm, B=12 mm, and C=1.2 mm. The radiation box dimensions (100 mm × 100 mm × 55 mm), …
Published in Journal of Microwave Engineering and Technologies · Vol. 11, Issue 3, 2024 · pp. 20–27 Read article
-
Split Ring Resonator Based Dual Frequency Microstrip Patch Antenna For Wireless Applications
Abstract: The objective of the work is to design a compact dual frequency microstrip antenna (MSA) at GSM 1800 MHz and ISM (2.4 GHz). The proposed MSA incorporates a rectangular patch with an inverted U slot printed on the top of RT duroid 5880 substrate with thickness of 0.8mm and dielectric constant of 2.2. The dimensions of the patch are optimized as 45x 54 mm2. It is fed by coaxial feeding. …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 2, 2022 · pp. 1–14 Read article
-
Design of a Stacked Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: The paper presents a stacked T-shaped Aperture coupled microstrip antenna designed for ultra-wide band wireless applications. The proposed UWB antenna covers two frequency bands as of 2.49 to 2.9 GHz and 6.85 to 20 GHz and used for the various applications like Bluetooth, Zig-Bee (2.4 GHz), C band (6 to 8 GHz), X band (8 to 12 GHz), Ku band (12 to 18 GHz) and Satellite communication. The stacked antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 12–16 Read article
-
E-Shaped Microstrip Patch Antenna for High Speed Wireless Local Area Network (WLAN) Applications
Abstract: A microstrip antenna consisting of E-shape radiating patch having low profile, probe-fed is designed and proposed for wireless local area networks (WLAN) applications. All countries use different WLAN, as the antennas available are not able to cover all the standards. This study aims to design a smallest antenna with better polarization covering all high speed WLAN standards ranging from 4.47 to 5.82 GHz. The patch antenna designed on low cost …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Performance Analysis of Rectangular Patch Antenna with EBG using Quarter Wave Feed Line and Coaxial Feed Line Methods for C-Band Radar Based Applications
Abstract: Microstrip antenna has various attractive features like light weight, low cost, easy fabrication, etc. Microstrip antenna can be fed in a variety of ways. This paper is focused on the enhancement of gain of the rectangular patch antenna with electromagnetic band gap structures at 7.5 GHZ for two different feeds and compares their results. The two types of feeds are coaxial line feed and quarter wave feed. Antenna design has …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 19–25 Read article
-
Design of a Fractal Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: Ultra wide band frequency allocation of 5.3–9.2 GHz spectrum by Federal Communications Commission (FCC) presented myriad applications of exciting opportunities and challenges for design in the communication arena, including antenna design. The compact antenna designs with operating bandwidths of more than 100% are a challenging demand for the current wireless scenario. This can be easily met with fractal boundaries by using wide slot antennas. In this paper, fractal slot antenna …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 19–22 Read article
-
An Extended Semi-circular Microstrip Patch Antenna with DGS for UWB Applications
Abstract: This paper presents the design of a semicircular patch with an extended length for UWB applications. The proposed antenna is fabricated on FR4 substrate with relative permittivity of =4.4 and dimensions of 29.5x38x1.57 . The feed used in proposed design is 50 Ω microstrip feed line. The partial ground structure with a T-shaped slot and dual right angled isosceles triangular notches of side 3 mm each has been introduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 13–18 Read article
-
A Review on Quad Band Microstrip Antenna for GSM and GNSS Application
Abstract: Micropstrip or patch antennas are also known as a printed antenna fabricated on printed circuit board (PCB). Microstrip antennas are low cost, have a low profile, low weight and are easily fabricated [1]. They are used atmicrowave frequencies. In this review paper, a survey on quad band operations in patch antenna papers, which have been used by authors for designing of low profile, small compatible patch antenna, have been presented. …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Planar UWB Antenna for 5 GHz ISM Band
Abstract: AbstractThe Ultra-Wide Band (UWB) technology used for high data rate with low power levels for many wide applications which mainly includes short range, wide bandwidth communications. The Planar UWB antenna is designed for 5GHz Industrial, Scientific and Medical (ISM) band. These bands are specially dedicated to industrial, scientific and medical applications other than telecommunications. ISM applications like Microwave ovens, RF process heating and medical diathermy application. Proposed antenna has VSWR …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 1–6 Read article
-
Design and Simulation of Triple Band Microstrip Patch Antenna for Ku-band, K-band and Ka-band Applications
Abstract: AbstractThis paper represents a microstrip patch antenna for future 5G-communication technology. The proposed antenna designs are simulated and their performances are analyzed for different parameters like lower return losses, higher gain, voltage standing wave ratio (VSWR), current distribution, far field radiation and wide bandwidth performance for the tri-frequency band operation in Ku band (12–18 GHz),K-band (18–27 GHz) and Ka-band (27–40 GHz) as per the specified IEEE standard. The proposed antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 1, 2020 · pp. 26–33 Read article
-
T-Shape Antenna with Defected Ground for 5G Applications
Abstract: In this paper, for 5G cellular applications, a novel microstrip patch antenna with high gain and wide bandwidth MMW frequencies is presented. The antenna is designed as single T-shaped radiating patch on the top layer of substrate and for improving the bandwidth and return loss characteristics, partial ground is incorporated on the bottom plane. A 50Ω matched lumped port is used for the feeding. In addition, the proposed antenna is …
Published in Journal of Mobile Computing, Communications & Mobile Networks · Vol. 6, Issue 1, 2019 · pp. 23–27 Read article
-
A Survey on Recent Microstrip Patch Antenna for Navigational Application
Abstract: ABSTRACTSince last so many years microstrip patch antenna is one of the important fields for antenna design. For a different application of satellite communication in which prize, structure simple installation process is one of the key requirement low profile antenna is good to consider. Microstrip antennas is also fulfill the requirements of mobile communication as well as wireless communication. For navigational application the few important parameters are there like compact …
Published in Journal of Communication Engineering & Systems · Vol. 9, Issue 1, 2019 · pp. 55–59 Read article
-
Low profile L5 and S band Microstrip antenna for IRNSS Application Using Coxial Feed
Abstract: In recent aura, navigation is one the most demanding technology. To increase coverage, gain and bandwidth are more important of any wireless communication systems India has developed its own navigational system called IRNSS which work one two frequency band one is L5 (1.176 GHz) and second one is S band (2.482-2.502 GHz) In this paper we proposed 2 different antenna one for L5 band and second for S band antenna …
Published in Journal of Communication Engineering & Systems · Vol. 8, Issue 3, 2018 · pp. 7–17 Read article