Search
38 articles for “reservoir pressure”
-
Theoretical and Simulation Studies on Gas Well Performance
Abstract: The productivity of any oil or gas well is governed by its maximum flow potential with the available varying parameters such as draw-down pressure availability, tubing sizes available to lift the fluid, and others. The present study on the performance of a gas well delineates the appropriate parameters that are necessary for maximizing the flow from the reservoir to the wellhead surface by utilizing a performance simulator, with nodal analysis …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 9–24 Read article
-
Modeling and Optimization of Continuous Gas Lift Performance in Libya Oil Field
Abstract: With a massive number of oil and gas field becoming mature, the upstream engineering is facing new challenge. How to develop , or at least steady production while keeping obtainable reserves at their existing level, As matter of fact unstable production in gas lift wells. The Key issues most operators encounter with oil fields are the effects of high water production that may lead to wells died and decrease in …
Published in Journal of Petroleum Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 40–48 Read article
-
Pressure Data Analysis and Reservoir Parameter Estimation of Kailastilla Gas Field (Well No. KTL-01 and KTL-02)
Abstract: Well testing has been the subject of research for many decades. Well tests are performed in order to estimate reservoir properties. These estimations are needed to predict the amount of oil or gas that can be produced, and to determine a strategy how to produce this predicted amount. The current method to estimate the reservoir properties seems cumbersome and inefficient. Also, uncertainty regions of the estimated properties are not yet …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 92–102 Read article
-
Pressure Data Analysis and Multilayer Modeling of A Gas-Condensate Reservoir
Abstract: Kailastila gas field located at Golapgonj, Sylhet, is one of the largest gas fields in Bangladesh. It produces a high amount of condensate along with natural gas. For the high values of GOR, it may be treated as a wet gas at reservoir condition. Three main sand reservoirs are confirmed in this field (upper, middle and lower). In this study, it has been shown that reservoir parameters of this gas …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 7–15 Read article
-
Enhanced Oil Recovery (EOR) Process through Miscible Gas Injection: A Case Study of an Iranian Oil Reservoir
Abstract: Speedy computers and development in equations’ numerical solutions have enhanced applying simulation to predict the behavior of oil and gas reservoirs. The pressure in hydrocarbon reservoirs reduces overtime due to utilization of oil and gas resources until the fluid pressure itself is no more able to transfer it to the surface, and even if it reaches to the surface, its production is not cost-effective. Whereas, large amounts of hydrocarbon resources …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 1–8 Read article
-
A Major apprehension of Carbon Capture and Sequestration (CCS) for extraction of residual oil & minimizing emission of Greenhouse Gas(GHG)
Abstract: This paper deals with the incorporation of carbon-di-oxide into the pressure depleted reservoir to increase the production of the reservoir as well as to inject the carbon-di-oxide in a depleted reservoir to reduce the GHG emissions into the atmosphere. It also considers about the disputes arising due to legal proceedings, technology framework, geological barriers, stakeholder indifferences, project economics and environmental constraints for accomplishment of a successful CCS project.
Published in Journal of Petroleum Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 27–29 Read article
-
Contemplation of Coal Bed Methane in Petroleum Industry
Abstract: The hunger for energy has been on its peak since industrialization. The human race has been trying all hook and crook in order to discover new sources of energy. In today’s world, a minor portion of the energy requirement basket is being filled up by unconventional non-hydrocarbon resources but still the majority of it is filled by unconventional and conventional hydrocarbon resources. The conventional hydrocarbon resources are oil and natural …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 23–26 Read article
-
Evaluation of Chemical Application as Pilot to Improve Oil Production from High Viscous Oil in Sandstone Reservoir
Abstract: Chemical injection stimulation is one of worldwide proven technologies for viscosity reduction and mobility enhancement. The principle mechanism is to reduce heavy oil viscosity by injecting of active chemical agent solution into reservoir as huff and buff practice, the agent solution is act at near wellbore area by remove plugging of heavy organic material, Energy support due to large quantity of stimulation liquid being injected into the formation, viscosity reduction …
Published in Journal of Petroleum Engineering & Technology Read article
-
Relative Permeability Study in Part of Geleki Oil field of Upper Assam Basin
Abstract: Relative permeability is a critical parameter for evaluation of reservoir performance. Relative permeability is a direct measure of the ability of the porous medium to allow flow of one fluid when two or more fluids are present. This flow property is the composite effect of pore-geometry, wettability, fluid saturation, saturation history, reservoir temperature, reservoir pressure, overburden pressure, rock-types, porosity and permeability types. The relative permeability curves are very important in …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 9–14 Read article
-
Productivity of Hydraulically Fractured Calcite Rich Shale Reservoirs Enhanced by Acid
Abstract: The current low oil prices have highlighted the need for enhancement to current production from shale formations. Prolonging the production life and increasing productivity of the fracture network in the shale plays can be a way to improve the economics. Many shale wells, drilled and completed based on current completion strategies, show sharp decline after initial flash production. One of the reasons behind this can be attributed to closure of …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 54–68 Read article
-
Fitting Relative Permeability’s Curves Based on Laboratory Production Data for A Thermal Composite Core Flooding Experiment
Abstract: Numerical simulators are effective tools for an adequate understanding of models geological and dynamic properties under which enhanced oil recovery techniques are investigated. Core flooding experiments are usually conducted for calibrating simulated rock and fluid properties against actual test results at micro-scales, and for further scaling up processes to the reservoir scale. In this paper, laboratory experiments data were used as input for a numerical simulator to study the effect …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 41–56 Read article
-
Underbalanced Drilling and Its Advancements: An Overview
Abstract: Ever increasing global energy demand associated with depletion of conventional hydrocarbon resources drives exploration and production (E&P) industry to invent advanced new technologies in frontier areas of drilling, production and reservoir engineering to enhance hydrocarbon production from unconventional resources or depleted reservoirs. Demand to produce from a low pressure marginal reservoir and the discoveries of naturally fractured reservoirs lead to the development of new drilling techniques like underbalanced drilling along …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 37–51 Read article
-
Predictability of Equation of State (EoS)-based Gas Hydrate Models for Single and Binary Gas Mixtures
Abstract: The better models are necessary to design and understand the phase behavior of produced trapped natural gas from natural gas hydrates from subsea environments. Most of the models available in an open literature are primarily applicable at relatively low pressure condition thus making their use very limited for gas hydrate reservoir modeling. In order to produce methane from these gas hydrates, it is important to understand the phase behavior through …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 83–91 Read article
-
A Critical Review of Hydraulic Fracture Propagation in Shale Gas Reservoirs
Abstract: The successful exploration and development of unconventional shale gas reservoirs was possible with advances in hydraulic fracturing and horizontal drilling. Hydraulic fracture treatments open these natural fractures and create a fracture network in gas shales. However, the fracture propagation is not fully understood as of now. A critical review of hydraulic fracture propagation in shale gas formations is presented in this paper. Effects of pertinent factors on hydraulic fracture propagation …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 1–17 Read article
-
Process Scheme for Effluent Treatment for Reinjection of Produced Water
Abstract: The scope of the study is to conceptualize a treatment process for produced water treatment and reinjection into reservoir for pressure support. ABC field is producing 800 m3/day, with 60% water cut. To access the suitability of using effluent water for reinjection in ABC field, produced water analysis and treated water parameters have been considered for conceptualizing the treatment design. Produced water analysis reveals its inferior quality in terms of …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 47–52 Read article
-
Well Integrity and Reservoir Behavior under Sudden Field Shutdowns During Armed Conflicts: A Comprehensive Technical Review
Abstract: In the oil and gas industry, the sudden and unplanned cessation of operations resulting from armed conflicts or pandemics typically poses complex and multifaceted technical challenges to both well integrity and reservoir behavior. Minimal or no opportunity for proper pre-shutdown preservation procedures in unplanned shutdowns, unlike planned shutdowns that follow established operational protocols. The mechanisms and consequences of well integrity degradation and reservoir performance alteration under such conditions are synthesized …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 40–52 Read article
-
Study of Physical and Chemical Properties of Heavy Waxy Crude Oil from Cambay Basin Using Rheometer and Cross-Polar Microscope
Abstract: Production of heavy crude is quite difficult as the pressure drops from reservoir to production facility are quite large. This often leads to the precipitation and deposition of common organic solids (paraffin). These solids may deposit on surfaces, collect in low-energy regions or increase the effective viscosity of the flowing fluid. The net effect is an increase in pressure drop for a given rate through reduction in flowing area or …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 12–18 Read article
-
Liquefied Oxygen Fracturing: A Simulative Approach
Abstract: The entire project is a work on the simulation of fracture design on a new potential fracturing fluid liquefied oxygen. The purpose of this study was to conduct a comparative study between hydraulic fracturing and cryogenic fracturing (liquefied oxygen) for the same reservoir having same properties to generate potential information on intrusion of fracturing fluid, pumping criteria, final stage pump pressure, required pumping time for both the fluids water as …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 43–51 Read article
-
Investigation on the Benefits of Steam Adsorption and Distribution during Cyclic Steam Injection to Improve Oil Recovery - FNE Case Study, Sudan
Abstract: One of the main types of Enhanced Oil Recovery (EOR) methods is thermal stimulation method which is an increasingly common method of extracting heavy oil. there are different forms of the technology of thermal method Cyclic steam stimulation, Steam flooding and In-situ combustion “Fire flooding” are commonly applied to oil reservoirs, which are relatively shallow very viscous oil at the reservoir temperature, the most widely used steam injection methods for …
Published in Journal of Petroleum Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 1–21 Read article
-
Capacitance–Resistance Model Application to Reservoirs Primarily Under Aquifer Influx
Abstract: Previous Capacitance – Resistance Models that have been developed to characterise black oil reservoirs undergoing waterflooding do not apply to waterflooding of reservoirs primarily under aquifer influxresulting in significant error. This paper has attempted to overcome this limitation by presenting the aquifer influx as a pseudo injector whose injection rate is represented by an existing aquifer model.The influencing parameters of the model have been modified to include an aquifer influx …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 16–29 Read article