Search
19 articles for “RCC building frames”
-
Optimization of RCC Building Frames Using Bracing and Without Bracing with Various Position of Shear Wall
Abstract: This review paper aims to analyze the optimization of reinforced cement concrete (RCC) building frames. In particular, it sets out to analyze the structural performance of frames that have not been braced, and frames which have been braced, along with the different shear wall configurations. RCC frames (as the name suggests) are key elements of modern construction because they offer strength combined with flexibility. In addition, structural elements such as …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 34–44 Read article
-
Performance based seismic design of reinforced concrete asymmetrical building
Abstract: The nonlinear static analysis of asymmetrical G+20 reinforced concrete building is carried out using design tool. Nowadays, in most of the RCC framed buildings irregularities are commonly observed. Buildings needing simple regular geometry suffer much less damage than buildings with irregular configuration. The poor performance and structural damages in an irregular building type of structures during the frequent earthquakes increased the need to determine and evaluate the damages in the …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 29–36 Read article
-
Effect of Wind on Multistoried Structure for Irregular Plan with Optimum Shear Wall Location using E-TAB Software
Abstract: For multistory structure, the challenge is to make it feasible in terms of lateral loads due to wind and earthquake, which prominently dominate the structure. This study chronicles the stages of ongoing research initiative to study several high-rise buildings of irregular shapes under action of wind with and without shear wall and its optimum location in the structure. Multi-storey irregular buildings of irregular plans like h-shape, J-shape of RCC framed …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 1–6 Read article
-
Study on High Rise (G+32) Cluster Shaped Building Under Earthquake with the help of IS 1893, UBC-97 and ASCE 7-10 codal provisions
Abstract: Modern high-rises, in low seismicity areas, are designed to withstand lateral loads.While high rise buildings would suffer structural damage, the shaking produced by the earthquake is a long period of slow shaking.The stability and stiffness of any structure is the major issue of concern in any high-rise buildings.This research is related to comparison of high rise G+32 cluster shape building under Seismic area with the help of different country codes …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 24–33 Read article
-
ANALYSIS OF G+15 NORMAL RCC FRAME AND ZIPPER BRACED FRAME BY PUSH OVER METHOD IN SAP2000
Abstract: This paper describes the comparative analysed results of R.C.C zipper braced frame with standard RCC regular frame for residential building of G+15 storey. The modelling of zipper braced frame were done by using pushover analysis method in SAP2000 software. Pushover analysis were performed for estimating the hinges in both frames, displacement, base shear and modal time period. The analysis indicates that there is almost insignificant hinges in zipper braced frame …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 21–34 Read article
-
Analysis of Highrise Building Using Diaphragm in STAAD Pro at Different Zones
Abstract: Each multi-story building means a significant investment and as such multi-story building analysis is generally performed using more sophisticated techniques and procedure. Therefore, accepting modern ways to seismic analysis of multi-story buildings can be very valuable to structural engineers and researchers. Floor and roof systems act as a diaphragm to transfer the lateral load to the vertical load supporting elements like beams, columns, walls, etc. For simplicity in the dynamic …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 22–34 Read article
-
Seismic Analysis of G+30 RCC Frmaed Structure and Use of R.C Jacketing
Abstract: In high-rise buildings, such as G+30 reinforced concrete (RCC) framed structures, key concerns during seismic events include maintaining structural integrity, preventing catastrophic collapse, and ensuring the safety of occupants. Seismic retrofitting is a vital process aimed at enhancing the resilience of such buildings and infrastructure against earthquake forces, by strengthening their ability to withstand seismic activity. This abstract provides an overview of numerous seismic retrofitting projects implemented worldwide, focusing on …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 20–37 Read article
-
Response Study of High Rise Building under Wind Load
Abstract: Wind is a phenomenon of great complexity because of the many flow situations arising from the interaction of wind with structures. Wind is of the most significant forces of nature that must be considered in design of buildings. The characteristics of wind-induced loads on buildings continuously vary in temporal and spatial dimensions. Adequate design of buildings depends on the success in predicting the actual effects of turbulent wind forces to …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 35–45 Read article
-
Progressive Collapse of RC Frame Subjected to Dynamic Loading
Abstract: The present research work is carried on progressive collapse analysis of RCC building considering seismic effect and Time History Analysis. The spread of local damage lead to damage element to element ultimately leads to collapse of larger structure. Progressive collapse analysis is performed on high rise G+22 structure using finite element-based computer program under various loading condition. The response of RCC framed structure under seismic loading and Time History Analysis …
Published in Journal of Structural Engineering and Management · Vol. 9, Issue 1, 2022 · pp. 26–33 Read article
-
Comparative Study of Multistorey Building with Composite Column at Soft Storey
Abstract: Increase in population, car parking space is major concern. Hence, trend has been set up to use ground floor for parking purpose. Literature shows that, large number of reinforced concrete (RC) building with soft storey damaged by earthquake shaking due to many structural deficiencies such as, column with insufficient confinements, strong beam weak column, formation of plastic hinge at beam-column joint, opening of 90 degree ties, poor detailing in beam-column …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 37–42 Read article
-
A Review Study on Dynamic Analysis of Multistoreyed Buildings by using Seismostruct Software
Abstract: Civil Engineering structures are designed to withstand environmental forces like earthquake, along with gravity loads. These forces are random and dynamic in nature. Therefore the response of the structure is also dynamic and that is what causes the unsafe and uncomfortable conditions. So, performance based analysis of the structure is required which can be achieved by Incremental Dynamic Analysis (IDA) as well as Response Spectrum analysis (RSA). But, Incremental dynamic …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 53–63 Read article
-
Comparative Analysis of RCC Diagrid Building with conventional Building By E-TAB Software
Abstract: AbstractThe rapid growth of urban population and limitation of available land the taller structures are growing up now days. Structure design of high rise buildings is governed by the lateral loads due to wind or earthquake. Lateral load resistance of structure is provided by shear wall, wall frame, braced tube system, outrigger and tubular system. Recently the Diagrid-Diagonal grid system is widely used for tall buildings due to its structural …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 3, 2017 · pp. 1–6 Read article
-
Vibration control of a Plan irregular RC framed structure under seismic excitations with the help of TMD along with bracings
Abstract: The study of dynamic behavior of high-rise structures is immensely important as the dynamic response of the structures due to natural forces like seismic forces, wind forces etc. may result in structural failure. An unsymmetrically located shear wall or similar kind of stiff element may cause the structure to have plan irregularity. Such type of plan irregularity in high rise structure can induce the torsional displacements in the structure subjected …
Published in Journal of Structural Engineering and Management · Vol. 9, Issue 3, 2022 · pp. 1–8 Read article
-
REVIEW ON BEHAVIOUR OF R.C.C FRAMES
Abstract: Reinforced concrete (RC) frames consist of horizontal elements and vertical elements connected by rigid joints.This review gives an idea about various parameters have been derived about RCC Frames from different researches. Based on previous studies and observations, a conclusion have been made that an In-filled wall in the multi story building can resist the lateral load and also helps in getting the good strength and stiffness.
Published in Journal of Construction Engineering, Technology & Management · Vol. 9, Issue 1, 2019 · pp. 17–20 Read article
-
COMPARATIVE SEISMIC RESPONSE OF IRREGULAR HIGH-RISE RCC 25 STOREY BUILDINGS WITH AND WITHOUT SHEAR WALLS CONSIDERING P–DELTA EFFECT
Abstract: The seismic performance of high-rise reinforced concrete (RCC) buildings is significantly affected by plan irregularity, lateral stiffness distribution, and second-order (P–Delta) effects. Irregular structural configurations may generate torsional response and increased deformation demand under seismic excitation while geometric nonlinearity further amplifies displacement and internal forces in tall structures . This study presents a comparative seismic assessment of a G+24 storey RCC building having overall plan dimensions of 30,000 mm × …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Static and Dynamic performance of RCC framed structure subjected to Geometric and Material non linearity
Abstract: Extensive research in the field of construction materials has led to the manufacture of improved materials and the engineers are familiar with the properties of the materials more than ever before. This has helped to predict the behavior of the structure in its entire intended time of service. Finite element based software can now predict the structural elements that may becritical in due course of time. These analyses are tedious …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 21–26 Read article
-
Comparative Study of RCC, Steel and Composite Structures by Using ETABS Software
Abstract: Building constructions by composite material in the current era very popular because of their vantage over conventional concrete and steel construction. It is noted that R.C.C buildings are being relatively large in size and give relatively less deflection and more seismic weight, whereas steel building instruct more ductility and deflection to the structure, Which is enhancing well-being in resisting earthquake forces. In this thesis Comparative Study of R.C.C., Steel and …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 2, 2019 · pp. 38–45 Read article
-
STUDY OF EFFECT OF SSI ON SEISMIC RESPONSE OF AN IRREGULAR RC STRUCTURE ON SLOPING GROUND AND ITS RESPONSE CONTROL BY USING BRACINGS
Abstract: Structures located on sloping terrain surface are more susceptible to earthquake because of uneven plan and elevation irregularities. Lately, high-rise buildings have been design with various plan and elevation irregularities to elevate their visual aesthetics. In the most of cases, the structural analysis under an earthquake load has been done without considering the effect of soil-structure interaction (SSI), thereby it may not reflect the actual seismic response of the structures. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 39–51 Read article
-
Study of Structures Considering Second Degree Analysis P-delta and Construction Sequence Analysis
Abstract: Infrastructure plays an important, rathernecessary role in modern society.Real estate amenities surrounding to us give everyone access to multiple aspects of technology which help to carve the frame of mind.Amenities, which once were rare and difficult to avail for everyone, is now available to common civilians.Recently, RCC structures has changed a lot,the symmetrical and identical storeys of premises is now considered as a conventional and to an extent inefficient design.The …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 1, 2021 · pp. 38–42 Read article