Search
258 articles for “thermal load”
-
Variables Influencing the Reinforcing Effect of Organoclay in Polymer Nanocomposites
Abstract: This study examines how several factors affect the mechanical and thermal characteristics, such as tensile strength, tensile modulus, impact strength, thermal decomposition temperature, and Vicat softening point tests of poly(vinyl chloride)/organoclay nanocomposites. The variables included three different organoclay loading levels, three different screw rotation speeds, and three different plasticizer contents. A co-rotating twin-screw extruder was used to create the poly(vinyl chloride)/organoclay nanocomposite via the melt intercalation process. The properties of …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 1, 2025 · pp. 55–64 Read article
-
Comparative Study of Performance and Emission of Gasoline and Gasoline-Ethanol Blends
Abstract: AbstractThis study is about analysing performance of gasoline and gasoline-ethanol blends in multi-fuel engine. Performance, combustion and emission characteristics of gasoline fuel and gasoline ethanol blended fuels have been analysed in detail under various load conditions, various ignition angle, different compression ratios and at different rpm. The study showed improvement in thermal efficiency at higher compression ratios compared to lower compression ratios as well as with ethanol blended fuel. There …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 9, Issue 3, 2018 · pp. 1–8 Read article
-
Experimental Investigation on a Diesel Engine Fuelled with Blends of Karanja Biodiesel and Diesel: Combustion and Performance Studies
Abstract: With the stock of fossil fuels diminishing throughout the world and demand for energy based comforts and mobility ever increasing, time is ripe that we strike a balance between energy security and energy usage. Moreover having uplifted to such a sphere of engineering excellence, reverting back to the ages of the bull carts will prove next to impossible thereby compelling us to search for a basket of alternative fuels to …
Published in Trends in Mechanical Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 41–52 Read article
-
Deep Learning-Based Thermal Prediction Models for Solid-State Electronic Devices
Abstract: The rapid advancement of solid-state electronic devices in high-performance computing, communication systems, automotive electronics, and renewable energy applications has significantly increased concerns related to thermal management and device reliability. Excessive heat generation in semiconductor devices adversely affects operational efficiency, switching performance, lifespan, and overall system stability. Traditional thermal prediction methods often require complex numerical computations and extensive simulation time, making them less suitable for real-time monitoring and adaptive control applications. …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article
-
IoT-Enabled Polymer–Gel PCM Composites for Intelligent Thermal Management in Solar Facade Applications
Abstract: The present study investigates the development of a multifunctional polymer–gel phase change composite designed for solar façade applications with integrated real-time thermal monitoring capability. A crosslinked polyvinyl alcohol–borax matrix was employed as a three-dimensional polymer scaffold to encapsulate paraffin-based phase change material, ensuring leakage-free operation and structural integrity under repeated thermal cycling. Graphite nanoplatelets were incorporated as thermally conductive nano-fillers to enhance heat transfer through the polymer composite via percolation-driven …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 99–111 Read article
-
Competency of Natural Fiber Based Eco-Friendly Friction Lining Composites Over the Conventional Friction Material
Abstract: The Braking system is important system of automobiles and is responsible for providing better performance and safety. A Millions of automobiles are frequently decelerated and stopped at heavy traffic zone. Overall performance of vehicle braking system depends on braking conditions and brake material. All friction based application releases wear products; either gaseous form or particulate matter form and braking system is prime source of non exhaust particulate matter emission. The …
Published in Journal of Polymer & Composites · Vol. 9, Issue 4, 2021 · pp. 57–65 Read article
-
Competency of Natural Fiber Based Eco-Friendly Friction Lining Composites Over the Conventional Friction Material
Abstract: The Braking system is important system of automobiles and is responsible for providing better performance and safety. A Millions of automobiles are frequently decelerated and stopped at heavy traffic zone. Overall performance of vehicle braking system depends on braking conditions and brake material. All friction based application releases wear products; either gaseous form or particulate matter form and braking system is prime source of non exhaust particulate matter emission. The …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 57–65 Read article
-
Post-Treatment Methods in Additive Manufacturing: A Review of Mechanical, Thermal, Chemical, and Hybrid Approaches
Abstract: Additive manufacturing, particularly Fused Deposition Modeling (FDM), has become a cornerstone of rapid prototyping and functional part production due to its accessibility and material versatility. However, the inherent layer-by-layer nature of FDM introduces surface roughness, reduced mechanical strength, and anisotropic behavior, which limit its industrial applications. This literature review investigates the impact of chemical post-processing treatments such as solvent vapor smoothing, immersion, and hybrid chemical-thermal methods on the surface quality …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 25–34 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
Evaluation of Diesel Engine Performance Using Neem Oil Methyl Esters and Biogas as an Alternative Source
Abstract: AbstractThe Neem oil methyl ester (NOME) used as a biofuel is produced by transestetrification process with an aim to reduce the viscosity level, fuel economy and less environmental pollution. Further, addition of biogas to the NOME is expected to improve the performance. The objective of study was to evaluate the performance parameters such as Total fuel consumption (TFC), Specific fuel consumption (SFC) and Brake thermal efficiency (BTE). The experiment was …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 8, Issue 1, 2018 · pp. 21–25 Read article
-
Exploration of Diverse Epoxy-Based Surface Coating Methods for Enhancing Anticorrosion Characteristics
Abstract: Epoxy-based polymers, commonly referred to as polyepoxides, constitute one of the most versatile and widely adopted categories of polymeric materials due to their exceptional structural, mechanical, and chemical characteristics. Their unique macromolecular framework enables strong interfacial bonding, high mechanical stability, and superior resistance to environmental and chemical degradation, positioning them as advanced alternatives to many traditional organic corrosion inhibitors that often fail under prolonged exposure to aggressive conditions When polyepoxides …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 167–177 Read article
-
Available Transfer Capability (ATC) under Deregulated Environment
Abstract: The structure of the power industry is moving towards deregulated environment from the regulatory environment (monopoly). With deregulation taking place in the power industry, it introduces a more competitive environment in terms of free choice of suppliers for the trading of electricity. Monopolies of an industry will lead to a poor performance from the sector as there are no competitions for the sole company to strive for improvement. It will …
Published in Journal of Power Electronics and Power Systems · Vol. 6, Issue 2, 2016 · pp. 85–88 Read article
-
Industrial wagon tippler to scheme and scope materials handling
Abstract: This article is study about tippler to discharge bulky materials of various plants on conveyor transit system. Tippler is used for emptying loaded wagons by tipping it. Clamp devices have been inclusive to tippler so as to retain wagon from top as well as from side. Wagon tipplers have equipped with track stops, wheel grippers and different type of limit switches. Geometry of fabrication has categorized wagon tipplers by either …
Published in Journal of Production Research & Management · Vol. 12, Issue 1, 2022 · pp. 1–7 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Exploring the Effect of Modified Nanosilica on a Model LDPE–EVA-based TPE System
Abstract: The effect of modified nanosilica particles on a model low-density polyethylene (LDPE)–ethylene vinyl acetate copolymer (EVA) based thermoplastic elastomer (TPE) blend system is explored in this article. Modified nanosilica particles were melt-blended with the LDPE-EVA system at 1.5, 3, and 5 wt% loadings through the variation of the sequence of addition. The blends were compression molded, and their morphological, rheological, mechanical and thermal properties were evaluated. The properties of the …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 17, Issue 3, 2015 · pp. 6–16 Read article
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
Polymer Matrix Characterization and Interfacial Engineering in Bamboo/Sisal/Chopped Mat Hybrid Fiber Composites
Abstract: The present investigation focuses on the characterization of polymer matrices and the interfacial behavior of bamboo, sisal, and chopped strand mat (CSM) fiber-reinforced epoxy composites. The work aims to understand how natural fibers influence the curing, thermal, and adhesion properties of hybrid composite systems. Experimental analyses were carried out using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) to evaluate curing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 123–135 Read article
-
High-Performance Aluminum Matrix Composites Reinforced with Graphene Nanoplatelets a Study on Mechanical and Thermal Behaviour
Abstract: This study investigates the effect of graphene nanoplatelets (GNPs) on the mechanical and thermal properties of aluminum matrix composites (AMCs) fabricated using the powder metallurgy route. Aluminum alloy Al-6061 powder was reinforced with varying GNP concentrations (0, 0.5, 1, 2, and 3 wt%), followed by uniaxial compaction and sintering. The influence of GNP content on the composite’s structural integrity, strength, and thermal behavior was thoroughly evaluated through tensile testing, hardness …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 38–49 Read article