Search
222 articles for “Nano-reinforcement”
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1145–1153 Read article
-
Self-Powered Piezoelectric Nano-Polymer Networks with Embedded Wireless Nodes for Distributed IoT Sensor Platforms
Abstract: Self-powered sensing systems are emerging as a promising solution for next-generation distributed Internet of Things (IoT) platforms, where lightweight, flexible, and low-maintenance devices are required for continuous monitoring. In this work, a self-powered piezoelectric nano-polymer network based on poly-vinylidene fluoride (PVDF) reinforced with BaTiO₃ nanoparticles and multiwalled carbon nanotubes (MWCNTs) was developed for flexible wireless sensing applications. The composite was designed to combine mechanical flexibility, enhanced piezoelectric response, and real-time …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Wettability and Physiothermal Analysis of Silver-Reinforced Eggshell-Derived Hydroxyapatite Based Biocomposite
Abstract: Hydroxyapatite (HAp), a biocompatible ceramic material, has garnered significant interest in medical applications due to its natural bone type replica. The current study investigates the physical, wettability, and thermal properties of a novel HAp derived from eggshell waste and reinforced with silver nanoparticles at 0.0, 0.1, 0.2 and 0.5 weight % concentration using chemical precipitation method and termed as HAP0.0Ag, HAP0.1Ag, HAP0.2Ag and HAP0.5Ag respectively. As observed, the Fourier transform …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 300–314 Read article
-
Tribological Study on SiC+Graphene Reinforced Al319 Composite andOptimization of Stir Casting Parameters
Abstract: The aluminium 319 (Al319) is a commonly used material for fabricating automobile components. Due to continuous friction and vibration, those components are subjected to significant wear. Therefore, it is necessary to improve the wear characteristics of this Al319. Hence, in this study Silicon Carbide (SiC) and Graphene nanoparticles (GNPs) are reinforce to Al319 via electro-magnetic stir casting method to optimize wear characteristics without its affecting mechanical properties. Various proposition of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 105–123 Read article
-
Comparison of Mechanical Properties of Resin-based Dental Composites with Different Filler Types
Abstract: The aim of this study was to evaluate in vitro the influence of nano-sized filler particles and agglomerates of nano-particles (nano-cluster)in resin-based dental composite material. Four commercially available resin-based dental composites – Filtek Z250, Filtek Supreme, Filtek Z100 (3M ESPE, St Paul, MN, USA), Heliomolor (Ivoclar Vivadent, Schaon, Liechtenstein) containing different filler particle types and morphologies were investigated. The compressive strength, compressive modulus, flexural modulus and flexural strength of these …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 22–29 Read article
-
Experimental Investigation for Strengthening the Nanocomposite Cementitious Materials with a Nanoscale Modification
Abstract: For the last few decades, researchers have widely used nanopolymer to control the mechanical properties of cementitious materials as a micro reinforcement. This paper examines and compares the mechanical and microstructure property of nanofiber cementitious material. Twenty-four sets of beam/cube cast with carbon nanofibers (CNFs) cementitious material where CNFs were used from 0.1%, 0.2%, and 0.3% of cement weight. The nanoparticles were scattered using a surfactant and an ultrasonic probe …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 10–24 Read article
-
Polymer-Based Transparent Conductive Composites for Flexible Solar Panel Coatings
Abstract: This study investigates the fabrication and characterization of polymer-based transparent conductive composites (PTCCs) tailored for flexible solar panel coatings using poly(methyl methacrylate) (PMMA) and poly(ethylene terephthalate) (PET) matrices reinforced with silver nanowires (AgNWs), multi-walled carbon nanotubes (MWCNTs), and PEDOT:PSS. The composites were synthesized through a solution blending and doctor-blade casting method followed by post-treatments to enhance interfacial bonding and conductivity. Optical transmittance values above 85% were achieved across all composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 99–110 Read article
-
Review of Thermal Performance of Solar Air Heaters: Influence of Composite Materials and Advanced Thermal Storage Techniques
Abstract: Solar air heaters (SAHs) are essential devices for capturing solar energy and converting it into heat, finding applications in steam generation, refrigeration, agricultural drying, and space and water heating in residential and commercial environments. However, the thermal performance of SAHs is often limited by the low heat transfer coefficient of air and the absence of solar energy during nighttime, impacting efficiency and reliability. To address these challenges, this study explores …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 488–506 Read article
-
Hybrid Composite Behavior of Concrete-Filled Steel Tube (CFST) Columns: Review of Collapse Mechanisms and Polymer-Based Enhancements
Abstract: Concrete-Filled Steel Tube (CFST) columns are an advanced hybrid composite system where the steel tube's confinement and the concrete core's load capacity work together to improve structural performance. While commonly used in civil engineering, CFSTs can also be understood within the framework of composite materials, similar to polymer- and fiber-reinforced composites, in which interactions between phases determine strength, ductility, and failure modes. This review compiles experimental and numerical research on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 78–97 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
A review of nanocomposite coatings for marine applications
Abstract: This paper reviews the performance and material characterization of nanocomposite coatings on the hydraulic pipelines of Ship A-Frame, which were corroded due to seawater exposure. Hydraulic pipe lines made of carbon steel face severe corrosion due to the highly corrosive nature of seawater with high salinity and microorganisms. The shipping industry utilizes organic and inorganic coatings to safeguard the hydraulic and seawater pipe lines of deck machines from marine pollution. …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 1, 2024 · pp. 1–9 Read article
-
ISOLATION OF CELLULOSIC NANOPARTICLES FROM COIR FIBRE FOR THE PREPARATION OF NATURAL RUBBER COMPOSITES
Abstract: Coir fibre and natural rubber are renewable and sustainable agro-resources that can be harnessed for the production of finished rubber articles on industrial scale. In this research, coir fibres extracted from coconut husk were subjected to alkaline-peroxide delignification. The delignified fibres were further transformed into coir fibre cellulosic nanoparticles (CFNP) with particle size distribution of 68–311 nm and a polydispersity index (PDI) of 0.371 through friction homogenization. These particles were …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 9–16 Read article
-
Thermally Trigged Self-Healing Smart Shape Memory Polymer Composite
Abstract: Temperature-responsive self-actuating PU/MWCNTs composites were prepared with micro-compounder through in-situ polymerization. For making of 1CNTPU composite sample 1 part per hundred multiwall Carbone nanotubes (MWCNTs) were reinforced into the neat polyurethane (PU) base matrix. Surface characterizations for pure and composite have studying by using Atomic Force Microscope (AFM), high resolutions Scanning Electron Microscopy (SEM). Properties like shape recovery, storage modulus, loss modulus, tensile stress, degree of hardness, and flexural stress …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 10–18 Read article
-
Artificial Intelligence for Polymer and Nanocomposite Materials: Performance Prediction, Manufacturing Optimization, and Future Perspectives
Abstract: The exceptional mechanical properties, design flexibility, and lightweight nature of polymer composite and nanocomposite materials make them indispensable in a wide range of applications, including aerospace, automotive, construction, biomedical, and energy sectors. The optimization of the strength, durability, and manufacturing efficiency of polymer composite and nanocomposite materials is highly challenging because their performance depends on matrix composition, reinforcement type, fiber or nanoparticle distribution, interfacial interactions, processing conditions, and environmental factors. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Thermo-hydraulic Performance of Multi-Pass Double-Pipe Heat Exchangers: Integrating Polymer Composite Tube Wall Materials via CFD Parametric Study and Experimental Validation
Abstract: Metallic materials such as steel and copper have traditionally dominated heat exchanger manufacturing because of their excellent thermal conductivity, mechanical strength, and long-established industrial reliability. However, their high weight, susceptibility to corrosion in aggressive operating environments, and inability to provide tunable thermal properties have motivated interest in alternative materials for next-generation thermal systems. Thermally conductive polymer composites reinforced with graphene nanoplatelets (GNP), boron nitride (BN), and carbon-based fillers offer an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Study on Preparation and Characterization of Ultrahigh Molecular Weight Polyethylene Nanocomposites Filled with ZnO Nanoparticles
Abstract: In order to create a completely flexible designed composite that makes it simpler to exhibit ideal mechanical and chemical properties, nano metal oxides are added to polymers as reinforcement. Polymer blends represent a crucial area in the management of innovative materials that outperform net polymers in terms of characteristics. Polymer mixes can provide components with lasting beneficial qualities, as opposed to what is possible with a single polymer equivalent. This …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 12, Issue 3, 2022 · pp. 1–11 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article