Search
1930 articles for “5 ‘S” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Seismic Behaviour of Curved Cable-Stayed Bridge
Abstract: Cable-bridges constructed in a more unique style for aesthetic and structural reasons. Curved cable bridges are not a common type of Highway Bridge in India, which are usually built at interchange which allows transportation of traffic from one highway to another. The current study presents the effect of horizontal curvature on the cable-stayed bridges. For this study, six finite element models of the cable-stayed bridge are developed with a different …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 14–22 Read article
-
Nano-additives in Concrete: Present Scenario and Challenges
Abstract: This research work reviews on nanomaterials in concrete. Now, the conventional concrete properties of nanomaterial utilization have been introduced various attentions to increase. Ultimately, as an introduction, nanomaterial is increasing the strength and durability of the concrete. The nanomaterial is defined as the material that includes the particle size which smaller than 200 nm. Nanomaterials must be at least 500 nm in size. During the research of concrete in the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 11–20 Read article
-
Comparative study on defluoridation by adsorption using rice husk ash, tamarind seed powder and activated
Abstract: In the present study, the ability and suitability of low cost adsorbents such as rice husk ash (RHA), tamarind seed powder (TSP) to adsorb fluoride ions was investigated in jar test apparatus and results were compared with that of commercially available activated charcoal powder (ACP). The major parameters such as pH, concentration of F- ions, stirring rate, contact time and different adsorbent dosages were studied and optimized. The maximum removal …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 25–32 Read article
-
Feasibility Studies on Cement Mortar Replaced with Ceramic Tile Waste as Secondary Binder
Abstract: This paper presents the results of experimental works focused on replacement of ceramic waste materials with cement in the production of cement mortar. The aim of this research work is to find the optimum percentage replacement of cement by ceramic tile waste in percentage replacement (5 to 25, 50 and 100%) mortar mixes. The ceramic waste tiles are mechanically crushed down ultrafine ceramic waste (UCW) powder passing 600 μ and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 68–75 Read article
-
Effect of pH on Shear Strength Behavior of Granular Soil
Abstract: In this research, the performances of pH value on shear strength behavior of granular soil have been studied. The shear strength of soil is an important term in most of the foundation engineering problems such as the bearing capacity of shallow foundation, slope stability of dam/embankment and lateral earth pressure on retaining walls. A series of direct shear tests were conducted on two types of dry granular soils (taken from …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 8–11 Read article
-
Effect of Fiber Hybridization on Compressive Strength and Water Permeability of Steel Fiber Reinforced Concrete
Abstract: The paper presents results of an investigation conducted to study the compressive strength and water permeability of hybrid steel fiber reinforced concrete (HySFRC). Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations. Mixes with no fibers were also cast for comparison purpose. Three fiber volume fractions, i.e., 0.5, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 11–16 Read article
-
Strength Assessment of RCC Beams Subjected to Corrosion
Abstract: The damage assessment of civil structural members is one of the most important and recently emerging fields in engineering. Deterioration of a structure may occur due to a host of factors such as poor workmanship, improper maintenance, atmospheric effects, accidents, natural calamities. Certain causes like environmental effects, natural calamities cannot be controlled. Therefore, durability of concrete structures especially those exposed to aggressive environments is of great concern. Many deterioration causes …
Published in Recent Trends in Civil Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 139–152 Read article
-
Analytical Determination of Strength of Demolished Recycled Coarse Aggregate
Abstract: Construction work has increased rapidly from the past two decades. With these construction activities going up, we find lacking of the construction materials, particularly aggregates. So, finding an alternate resource and their feasibility; study is the need of our project. Recycled or used aggregate proves to be a good alternative here. Therefore, the investigation was carried out using compressive strength test, confined to the objective we have tested and empirically …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 1–7 Read article
-
Optimization of Cement Replacement by Fly Ash in Compressive Strength of Portland Cement Concrete
Abstract: The production of cement has been known for its additive role in environmental pollution. As a measure of abatement of pollution effort, scientist have evoked the concept of diluting cement with various pozzolanic additive like fly ash, blast furnace slag etc. Many of these additives were found to be acceptable for cement replacement, but their exact role and efficacy remains elusive. In the present study, fly ash was added as …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 24–35 Read article
-
A Study on Strength and Durability of Fly Ash–Metakaolin Blended Geopolymer Concrete
Abstract: Production of cement causes 8% of the total carbon dioxide emissions in the world. Finding a right alternative to cement is the need of the hour, to eliminate environmental pollution caused by cement production. A substitute for conventional concrete can be industrial waste products like GGBS, Flyash, Metakaolin, and so on, these mineral admixtures can be used to fully replace cement with some activators this mix of mineral admixtures and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 51–59 Read article
-
Exploring the Influence of Rice Husk Ash on Compressive Strength: Experimental Investigations in Construction Materials
Abstract: This paper aims to know the effect of rice husk ash on compressive strength 6 molds were collected and laboratory tests were conducted in cooperation with private laboratories in Baghdad Governorate, Iraq. The tests were conducted for a period of 7 and 28 days, where the samples were divided into 1 control and 5 samples distributed on a different percentage from 5% to 25% of the rice husks. The compressive …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 24–28 Read article
-
Enhancing Concrete Strength: Investigating the Impact of Glass Fines on Mechanical Properties
Abstract: The global emission of CO2 from cement industries poses a significant environmental challenge, being a primary contributor to environmental issues. Numerous researchers have explored alternative cementitious materials to formulate robust and long-lasting concrete. This study focuses on utilizing waste glass powder (GlP), derived from rejected soda-lime glass bottles collected from various sources, for experimental purposes. The laboratory experiments investigate the behavior of concrete incorporating glass as a partial substitute for …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 15–23 Read article
-
Automated System for Reduction of Muscle Inflammation after an Injury
Abstract: AbstractThe therapeutic applications have equally gained more importance with that to surgeries in orthopedics. The main reason for pre-operative therapeutic methods on muscles deals in reducing the benign and malignant tumors, called as lesions. This is carried out with cryotherapy, which is the reliable, safer and cost-effective technique used. At first the ice packs and ice gel being applied to the area under treatment which could reduce the lesions and …
Published in Recent Trends in Electronics Communication Systems · Vol. 5, Issue 2, 2018 · pp. 7–12 Read article
-
Numerical Modelling and Simulation of Improved Partial Transmit Sequence for PAPR Reduction in OFDM Communication System
Abstract: Channel capacity and peak average to power ratio are essential elements in offering dependable communication through wireless medium in this competing wireless communication system. The rating of an amplifier in an OFDM system, as well as prospective future candidates of 5G systems such as FBMC and UFMC, is affected by a high peak to average power ratio. The demand for channel capacity fluctuates due to the growing number of wireless …
Published in Recent Trends in Electronics Communication Systems · Vol. 8, Issue 3, 2021 · pp. 33–39 Read article
-
Study of Effectiveness of Cone Cruciform Vortex Breaker Device in Reducing the Swirl Angle by Modifying the Number of Vanes Using CFD Technique
Abstract: AbstractMany of the large-scale vertical pumps installed in various pumping stations have experienced some sort of vibration, impeller damage due to local cavitation, excessive bearing wear, or loss of pumping efficiency, combinations of which are considered to be caused primarily by undesirable pump approach flow conditions such as vortices, swirl in intake structure, and inappropriate geometrical layout surrounding the bellmouth. Conventional fixes to resolve these problems include vortex breaker devices …
Published in Recent Trends in Fluid Mechanics · Vol. 5, Issue 2, 2018 · pp. 36–50 Read article
-
Eco-friendly Drilling Fluid Water Loss Controlling Agents
Abstract: AbstractThe water loss from the drilling fluid with the addition natural additives like bagasse, natural sugar, and natural rubber was studied. The entire study is focused on improving the quality of controlling fluid loss with effect of natural additives. The concentrations of the additives were changed to achieve the desired reasonable value of fluid loss with the help of high pressure and high temperature (HPHT) filter press which worked at …
Published in Recent Trends in Fluid Mechanics · Vol. 5, Issue 3, 2018 · pp. 19–21 Read article
-
Calibration And Comparison Of An Improved Rotatable Single Hole Probe In 4, 6 And 8 Positions
Abstract: An improved single hole probe with a measurement volume of 0.3 mm dia. is developed in the present investigation. The probe is calibrated in a low turbulence open jet tunnel at a velocity of 50 m/s in yaw and pitch angle range of + 40 deg. at an interval of 5 deg. A special probe holder is developed so that the probe can be positioned at intervals of 15 deg. …
Published in Recent Trends in Fluid Mechanics · Vol. 8, Issue 2, 2021 · pp. 25–36 Read article
-
A Review of Genetic Algorithm for Optimization of Hybrid Protocols for Wireless Sensor NetworkA Review of Genetic Algorithm for Optimization of Hybrid Protocols for Wireless Sensor Network
Abstract: AbstractWireless sensor network is a well-known technology. Resent development in the wireless technology open gates for making an efficient wireless network with no or very infrastructure. Wireless sensor network uses battery power to energize sensor nodes. Due to small size of sensor node, we cannot put big battery that is why it is very important to optimize the protocols to save energy. There are various techniques to optimize the WSN …
Published in Recent Trends in Sensor Research & Technology · Vol. 5, Issue 2, 2018 · pp. 1–5 Read article
-
A Framework on Healthcare Monitoring System
Abstract: AbstractHealthcare monitoring system reduces healthcare expenses by remotely monitoring the health of patients. Healthcare applications gaining high popularity due to the features like mobility, flexibility and ease of monitoring the patient. Nowadays various type of HMS are available in market from which some are based on WSN (Wireless Sensor Network), WBAN (Wireless Body Area Network). This type of system is mostly implemented in urban areas rather than rural areas. But …
Published in Recent Trends in Sensor Research & Technology · Vol. 5, Issue 3, 2018 · pp. 5–9 Read article
-
Wearable Rectenna Array for Wireless Power Transmission
Abstract: This paper explains about design of wearable antenna array which is used for receiving the microwave power transmitted at dual frequencies. Direct current power is obtained at the end of rectifying antenna or (Rectenna) composed with filter and Schottky diode. Proposed wearable antenna is designed on jeans textile as a substrate and copper foil tap as conducting material. The antenna array has the dual band resonating frequencies which are 4.65 …
Published in Trends in Electrical Engineering · Vol. 8, Issue 1, 2018 · pp. 59–64 Read article