Search
1981 articles for “composite Beta/MCM-41” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Aerogel Cellulose Composite–Considered at Low Cost
Abstract: This review descriptive issued as from cellulose aided fabrication to form eco-friendly aerogel. This is lightweight material to contain more than 99% air, which has been processed by multi shape in structure depending on application. Susceptibility to chain linkage to adjoin by glucoside bond, cellulose has polymerized naturally or artificially. Assay of script as from beneficiated bio-compose has utilized for amidation, etherification, silylation, urethanization, etc. Mechanical property of nanocellulose has …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 23, Issue 1, 2021 · pp. 5–15 Read article
-
Investigation on Synergistic effect of Carbon Black on Flow properties of EPDM Composite
Abstract: Ethylene Propylene Diene Monomer is one of the most widely used rubbers in automotive exterior sealing systems. It is the material of choice for automotive sponge weather strips around doors, trunks and hoods. Its exceptional air and ozone resistance capabilities, combined with its compounding adaptability, result in high-performing profiles at a low cost, while sealing off water, dirt, and noise for the life of the vehicle. Over the last decade, …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 12, Issue 3, 2021 · pp. 37–48 Read article
-
Studies on the Proximate Composition of Yogurt Enriched with Pink Guava Powder
Abstract: Dietary fiber and bioactive chemicals, which have been extensively investigated for their potential health advantages, have recently found new uses in the food and dairy industries. Taking into account the present surge in demand of consumers, an effort is made to increase the nutritional parameter of yogurt, notably the amount of dietary fiber, by the incorporation of freeze-dried pink guava powder (FPGP). The yogurt was made by varying its concentration …
Published in Research and Reviews : Journal of Dairy Science and Technology · Vol. 12, Issue 1, 2023 · pp. 1–12 Read article
-
Development of Fiber Enriched Herbal Biscuits by Incorporating Tulsi Leaves on Wheat Flour: A Preliminary Study on Sensory Evaluation and Chemical Composition
Abstract: AbstractThe study was designed to formulate a fiber enriched herbal biscuits by incorporating herbs (Tulsi leaves) that contains sufficient nutrient (protein and fiber enriched) and the major goal was to maintain the standard herbal biscuits. Herbal biscuits were developed by incorporating Tulsi (Ocimum sanctum) leaves, whole wheat flour, egg white, vegetable oil, dalda and other necessary ingredients. This recipe was standardized and evaluated for organoleptic acceptability by five point’s hedonic …
Published in Research & Reviews : Journal of Herbal Science · Vol. 2, Issue 2, 2013 · pp. 1–5 Read article
-
Moringa Oleifera: Traditional and Modern Uses, and Current Research Studies
Abstract: Moringa, also known as the Miracle tree, is a member of the Moringaceae family. It is an exceptionally valued plant that is found in various countries around the world. It is also a special food crop because it is highly nutritive and provides the body with essential amino acids, minerals, and vitamins, allowing Moringa to become an excellent food supplement. Furthermore, various Moringa species provide enormous medicinal benefits for various …
Published in Research & Reviews: A Journal of Pharmacognosy · Vol. 10, Issue 1, 2023 · pp. 10–25 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Properties of Concrete with Incorporation of Hybrid Fibers and M-Sand-A Review
Abstract: The construction sector is experiencing rapid growth, resulting in an increasing demand for building materials. Concrete, being the building material that sees the most widespread usage, Concrete, as the most extensively used building material, plays an important part in future breakthroughs and advancements However; to make progress we must also address the problems of global warming and pollution. The construction sector is widely considered to be one of the biggest …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 33–39 Read article
-
Multi-Target Molecular Docking of Anantmul (Hemidesmus indicus) Compounds for Tay-Sachs Disease Treatment
Abstract: This research aimed to study the effects of the plant Anantmul (Hemidesmus indicus) in the treatment of Tay-Sachs disease using molecular docking studies. Tay-Sachs disease is a neurodegenerative autosomal recessive disorder caused due to accumulation of the molecule GM2 ganglioside which is caused due to lack of enzyme Beta Hexosaminidase which breaks down GM2 Ganglioside. Anantmul (Hemidesmus indicus) is a an ayurvedic plant used in the Indian subcontinent that has …
Published in International Journal of Bioinformatics and Computational Biology · Vol. 2, Issue 2, 2024 · pp. 61–69 Read article
-
Modified Oil Bitumen with Polymer Waste for Oil Pipeline Application from Bitu
Abstract: Protection of oil refining, oil production and gas pipeline equipment from corrosion is the most important problem today. Currently, anticorrosive materials are mainly used, resistant polymer compositions, epoxy resin, bitumen and other materials for coating metal parts of these equipment. But these anticorrosive materials do not always provide metals from corrosion at the metal-antioxidant boundary and do not provide high strength of the protective layer, so these anticorrosive materials do …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 101–109 Read article
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
A High-Efficiency Fuzzy-Logic-Controlled Wireless Charger Enabling the Safe Integration of Electronics in Carbon Fiber Reinforced Polymer E-Bikes
Abstract: The integration of advanced electronics into structures made from carbon fiber reinforced polymers (CFRP) presents significant challenges, including thermal management constraints, electromagnetic interference (EMI), and the imperative for lightweight components. This study addresses these challenges by designing and validating a fuzzy logic-based wireless charging system specifically engineered for lightweight E-Bikes employing CFRP frames. The system mitigates thermal risks associated with the low thermal conductivity of polymer composites by implementing a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1159–1172 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Plunger Technique: A New Approach to Stir Casting AMMC Preparation
Abstract: Metal matrix composites (MMCs) are materials that are highly attractive for large range of hi-tech engineering applications. Keeping this in mind, materials for the present investigation were prepared by a drastically modified stir-casting technique where the usual solid shaft stirrer was replaced by a hollow/tubular spindle-stirring mechanism through which silicon carbide particulates in small cylindrical capsule were introduced to the aluminum-magnesium alloy matrix with the help of a plunger rod …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 26–32 Read article
-
Surface Modified Abaca Fibers: Physico-Mechanical, Morphological and Degradation Properties Evaluation
Abstract: Lignocellulosic fibers are used as cost-cutting fillers in plastics factories. Amid several factors, the ultimate performance of composite ingredients depends on the bond between the matrix resin and the filler, and hence on the quality of the interface. To acquire optimal performance of the end product, adequate interaction between the matrix and the lignocellulosic ingredient is preferred. This is often acquired through surface modification of the matrix or filler. Abaca …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 2, 2022 · pp. 34–46 Read article
-
Mucormycosis: Review on the basis of Diagnosis Treatment, Preventive Measures, and Recent Research Approach
Abstract: Mucormycosis is a fungal infection called an angio-invasive disease due to invasion of fungi of the order Mucorales and zygomatic species which causes tissue infarction and necrosis. The main aim and purpose of this review are related to the overview of Etiopathogenesis of Mucormycosis, mortality due to various types of Mucormycosis, recent advances in diagnostic and treatment methods, and their diagnostic preventive measures. It shows serious and worrying mortality and …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 10, Issue 3, 2021 · pp. 51–62 Read article
-
Effect of WEDM Machining Parameter on the MMC: A Review
Abstract: Recent area of manufacturing is highly focus on good accuracy and a complex shapes are mechanized by the advanced machining operation. The wire electrical discharge machining (WEDM) have the ability to produce the complex shapes with having high accuracy. The WEDM is non-contact type machining operation and is used for metal materials as well as Metal Matrix Composites (MMCs), ceramics composites those have many application in vast areas such as …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 1–7 Read article
-
Opportunities and Challenges in the Operations Management for Industry 4.0
Abstract: This study investigates the opportunities and challenges in the operations of composite manufacturing industry for the adoption of Industry 4.0. As known from the literature that industry-4.0 is referred as the fourth industrial revolution which majorly focuses on cyber-physical systems. It is suggested that the instantaneous integration of digital and physical systems, in conjunction with new transformative technologies that facilitate work, will revolutionise the ways of work and, as a …
Published in International Journal of Advanced Robotics and Automation Technology · Vol. 3, Issue 1, 2025 · pp. 7–17 Read article
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article
-
Isolation and Characterization of Glucuronide Compound from Luffa Tuberosa (Roxb.) for Potential Applications in Polymer Chemistry
Abstract: This study explores the isolation process of glucuronide compounds from Luffa tuberosa (Roxb.) using an efficient and cost-effective method. The extracted compound, Gypsogenin-3β-O-β-D-Methyl glucuronide, is characterized using spectroscopic techniques such as IR, NMR, and Mass Spectrometry. The polymeric nature of glucuronide-based compounds and their potential applications in polymer and composite materials are discussed. The findings highlight the suitability of glucuronide derivatives in biomedical, pharmaceutical, and polymeric drug delivery systems. Additionally, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 566–572 Read article