Search
1294 articles for “Mixing”
-
Effects of Carbon Fiber on Strength of Concrete
Abstract: Experimental investigations were carried out to evaluate the effect of carbon fibers on strength of concrete. The concrete mix of M-25 grade was considered and produced by replacing carbon fibers with cement. Modified concrete is produced by adding carbon fibers with various percentages as 0 to 0.6% at an interval of 0.2% with 10 and 20 mm in length. The compressive and flexural strengths are considered for investigations. Cube of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 1–8 Read article
-
Characterization of Fly-Ash and Cold Setting Resin Powder Compacts
Abstract: Industrial waste like fly-ash which is creating environmental problems, is mainly used as a building material due to its low cost and easy availability. But the main disadvantage of these bricks is its low strength. So, a lot of research is going on to increase the strength of these bricks. The present research work is carried out to develop a new systematic procedure to produce fly ash composite bricks which …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 2, 2015 · pp. 17–24 Read article
-
Prevention from Heat Exchanger Failure Analysis
Abstract: Abstract- Heat exchanger is the gear which is used to limit temperature of one technique fluid, which is preferred to cool, by using transferring heat to some other fluid which is favored to heat with or barring inter-mixing the fluid or altering the physical state of the fluid. There are a number of reasons by using which Heat exchanger can also fail. As they are used at huge vary of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 3, 2019 · pp. 35–43 Read article
-
Optical Filters From Silicon Dioxide Doped Dyes
Abstract: In this work silicon dioxide powder of high purity 99.5% imported from china was used to fabricate optical filters by doping the SiO2 with green and red phenol dyes with different concentrations of 0.25,0.5,0.75 and 1 in terms of mg, four samples of red SiO2 doped phenol filters and four samples of green SiO2 doped phenol filters were produced by pressing the mixture of silicon dioxide powder doped with the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 1, 2020 · pp. 39–48 Read article
-
Molebdate as Corrosion Inhibitor for Aluminium 356 In Acidic and Saline Media
Abstract: Corrosion processes are the cause of significant losses in industry. Organic, inorganic, and mixed material inhibitors have all been used to resist corrosion for a long time, but the environmental toxicity of organic corrosion inhibitors has driven a quest for inorganic corrosion inhibitors. The effect of molybdate as a new corrosion inhibitor on the corrosion of aluminium 356 in acidic and saline conditions was investigated using electrochemical and weight loss …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 39–47 Read article
-
Implementation and Simulation of High-Speed Dynamic Latch Comparator for ADC
Abstract: As per emerging issues in analog-mixed signal (AMS) design towards high-speed and low power, limits the performance of high-speed applications. Circuit complexity, speed, offset voltage and resolutions are essential parameter of comparator that affects the analog-to-digital converter (ADC) performance. Based on specifications, to achieve lower offset voltage and higher load drivability of latched comparator is presented. Moreover, the circuit is able to reduce power dissipation as the topology is based …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 2, 2016 · pp. 99–103 Read article
-
Survey of System-on-Chip Modular Test Approach
Abstract: The advancement in semiconductor technology over the past few decades has enabled the industry to develop new design and reuse methodologies referred as System-on-chip (SoC) design. These typically integrate heterogeneous mix of various complex analog and digital cores, with all their necessary electronic circuitry. The recent advancements have led to the use of the 3D structures (3D-SOCs) that brought along the benefits of higher performance, minimum average interconnect length, reduced …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 3, 2016 · pp. 56–70 Read article
-
Analysis of Six-Pulse Bridge Circuits Including Zener and Semiconductor Diodes – Part Two
Abstract: The present study offers a generic method for simulating and modelling six-pulse rectifier bridge circuits in the time domain. These circuits can include Zener and/or semi-conductor type diodes or even a mixture of them. The governing system of simultaneous algebraic and differential equations are listed and solved numerically using a computer code written in Mathematica. The flexibly written program can handle voltage sources of any time waveform, frequency or internal …
Published in Journal of VLSI Design Tools and Technology · Vol. 12, Issue 2, 2022 · pp. 13–21 Read article
-
Hydrochemical Characterization and Evaluation of Groundwater Quality of Delhi Region
Abstract: A hydrochemical study was conducted in Delhi to identify the chemical composition of ground water and water quality with respect to drinking purpose. 22 groundwater samples from various locations in Delhi region were investigated. The various physic-chemical parameters such as pH, total dissolved solids, total hardness, calcium, magnesium, total alkalinity, chloride, fluoride, nitrate, sulphate, sodium and iron were determined. Piper diagram and water quality index were used to determine hydrochemical …
Published in Journal of Water Resource Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 32–41 Read article
-
Waste Plants as a Green inhibitor for Reinforced Concrete
Abstract: AbstractIn recent years, the use of inhibitors in producing high performance concrete has increased significantly as a result of chloride and sulfate attacks. The present inhibitors in market are toxic to the environment. Hence, the objective of the present investigation was to study a novel, eco-friendly and a hydrophobic green plant extracts’ inhibitor (rice husks) and study the effects of it on compression strength of reinforced concrete. The inhibitor above …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 53–58 Read article
-
GEOPOLYMER CONCRETE BY LITHIUM BASED GLASS WASTE WITH FLY ASH
Abstract: AbstractThe cement, fly ash, and slag used in this study are local materials in compliance. The global warming is the major issue when limestone and clays are crushed and heated to high temperatures. We are using waste materials, its components, or its production process that does not cause any environmental problems, or it has high performance and life cycle sustainability. The waste material used in this research is three times …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 1–5 Read article
-
Comparative Study on the Compressive Strength of Bacterial Concrete using Spirulina and Bacillus Subtilis
Abstract: The bacterial concrete has remarkable advantages over ordinary concrete in self-repairing itself when cracked, and it proves to be an environmentally safe building material to be used. The objective of the present study is to investigate the feasibility of using Spirulina in bacterial concrete. A comparative study on the compressive strength of M30 grade of concrete using Spirulina and Bacillus Subtilis (B.Subtilis) were carried out. Volume of Spirulina and B.Subtilis …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 18–22 Read article
-
Experimental analysis of quaternary cement binder
Abstract: As concrete structure emitted large amount of carbon dioxide in the environment, to reduce these emition, need to minimize use of cement by using supplementary cementious material such as fly ash, silica fume, rice husk, ground granulated blast furnace slag etc. As quaternary blended cement concrete is prepared by replacing of cement with cementious material is good option for this. In this research quaternary blended cement concrete prepared by using …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 12–17 Read article
-
Effects of Polypropylene Fibre on Strength of Geopolymer Concrete
Abstract: In the construction industry, the most vital parameter considered in the current scenario is the sustainable development of the structures. The most used material in construction is concrete, which is primarily made up of Portland cement. The production of Portland cement is nearly about 2.6 billion tonnes per year and is increasing at the rate of 5% annually. The concrete industry contributes about 5–8% of all human generated carbon dioxide …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 23–31 Read article
-
Green Concrete Using Fly Ash and Silica Fume
Abstract: Recycled coarse aggregate can also be used by partially replacing natural concrete aggregates, so that construction and demolition waste can be further used for aggregates in new construction. Recycled coarse aggregate includes brick, tile aggregates, crushed stone aggregates, glass aggregates, and demolished aggregates. In this paper, different recycled aggregates are used by 40 and 60% replacement with natural aggregates of size 20 mm. Granite stone, brickstone, concrete debris are used …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 57–62 Read article
-
Utilization of Rice Husk Ash and Fly Ash in Construction Industry
Abstract: This experimental work is an effort to try to develop the awareness and importance of waste management and its utilization in productive manner among the people. In today’s more environmentally conscious world, a more responsible approach to the environment is to increase the use of by-products of one which is disposed off as waste as raw material for construction industry. Substitution of OPC cement by rice husk ash and fly …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 13–28 Read article
-
Economical Analysis of Lime and Fly Ash Stabilized Flexible Pavements
Abstract: India is experiencing tremendous growth in infrastructure including road network and highways. Roads are to be designed with good reliability to fulfill the long-term performance during the design period. Most of the time flexible pavements in India need to be constructed on problematic subgrade soil. Such subgrades have low California bearing ratio which leads to more pavement thickness. Decrease in availability of suitable sub-base and base course materials for highway …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 36–44 Read article
-
Experimental Investigation on the Effect of Manufactured Sand in Concrete
Abstract: Concrete is the most widely used construction material owing to its versatile nature. Three fourth of the concrete is made of aggregates, amongst which fine aggregate has massive demand. River sand is the predominantly used fine aggregate, which is under significance because of the increased demand and less availability. The continuous mining of river sand has also affected the environment; ecologically and economically. Manufactured sand offers viable alternative to natural …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 45–52 Read article
-
A Comparative Study of Fly Ash Bricks Made with Blend of Clay Brick Waste and Stone Dust
Abstract: The growing environmental concerns and proper disposal of brick waste is a challenge for construction industry. Many research articles support the use of brick waste in construction materials as aggregates. Production of bricks using waste brick aggregate has environmental benefits by lowering the disposal problem and at the same time saving conventional resources. The present work focuses on the utilization of brick waste as a partial replacement of conventional aggregates …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 60–67 Read article
-
Behavioral Assesment of Nanoinsertions in Cement Mortar
Abstract: In this paper is reported a comparative behavior of the 28days and long-term mechanical strength of nano additions to cement mortars w.r.t. ordinary controlled cement mortars. Nanomaterials are constantly being used to upgrade everyday products which are in constant use by us. It is seen that when these materials are singly added in optimized proportions to cement mortar they enable an enhancement of compressive strength at 28 days and also …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 15–21 Read article