Search
1652 articles for “SGI 400/15 grade”
Nothing matched all of your words, so these match any of them.
-
Role of Solid Acid Catalyst in Isopropylation Reaction
Abstract: Cumene synthesis was carried out by the reaction of benzene with isopropyl alcohol in the vapour phase over rare earth metal modified 13X zeolite. Zeolite modification was done by exchanging sodium ions of the zeolite with cerium ions to vary the acidity of the catalyst in the range of 0.25‑1.36 meq/g. The synthesis was carried out over a wide range of operating conditions. The synthesis conditions were optimized by studying …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 2, 2015 · pp. 19–26 Read article
-
Synthesis of Copper Oxide Nanoparticles using Ultrasound for the Treatment of Textile Organic Dyes (Reactive Black 5 and Basic Blue 3)
Abstract: This paper describes the ultrasound assisted synthesis of copper oxide (CuO) nanoparticles using copper nitrate trihydrate and ammonium carbonate as reactants. The resultant product, copper carbonate was calcined at 400°C which was chosen based on the thermogravimetric analysis of copper carbonate precipitate. The final product CuO nanoparticles characterized by X-Ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDAX), particle size analyzer (PSA) and Brunner-Emmet-Teller surface area analyzer (BET) …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 3, 2015 · pp. 16–22 Read article
-
An Insight into the Production of Bioethanol from the Duckweed
Abstract: The ultimate goal of this study was provided an insight into the production of bioethanol from the duckweed. In this study three experimental parameters for maximizing bioethanol yield were investigated during the dilute acid hydrolysis; acid concentration (0.6-1M), temperature (80-120oC) and time (60-180minutes). The conversion of duckweed to bioethanol can be achieved mainly by four process step; the first step was pretreatment of duckweed to remove different contaminates, dried at …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 2, 2020 · pp. 48–56 Read article
-
Integration of Photo-catalysis of Ultraviolet Rays for Chlorination Process of Methane Conversion into Mono-, Di-, Tri- and Tetra-Chloromethane
Abstract: Alkanes the most basic of all organic compounds undergo very few reactions due to its stability. One of the reactions is halogenation, or the substitution of single hydrogen on the alkane for a single halogen to form a haloalkanes. Example of this halogenation of alkanes is the chlorination processes. It is well established that methane-chlorine mixture undergoes substitution reaction at the temp of about 400ºC and presence of light without …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 8–10 Read article
-
Inhibition of Growth of Selected Bacterial Species Through the Use of Methanolic Maceratives of Black Soldier Fly Pre-Pupae
Abstract: The attempt is dealing with of analysis of effect of maceratives of prepupal stages of black soldier fly (BSF) (Hermetia illuncens L.) in methanol on the inhibition of the growth of selected bacterial species. The bacterial species used for the study include: Salmonella typhimurium (L.); Escherichia coli (L.); Pseudomonas aeruginosa (L.); Bacillus cereus (L); Bacillus subtilis (L); Streptococcus cremoris (L); Streptococcus faecalis (L); Staphylococcus aureus (L); Klebsiella pneumoniae (L); Salmonella …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 2, 2021 · pp. 30–44 Read article
-
Fermentation of Potato Peels Using Saccharomyces cerevisiae as a Fermenting Yeast
Abstract: This research was basically on the investigation into the possibility of fermenting a potato peel using Saccharomyces cerevisiae as a fermenting yeast which gave a very favourable result and found reliable and adoptable. Selected number of peels were washed very well with stream water (running water) to remove any form of dirt such as sand and other particles, and then the stone particles since the potato is a root crop. …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 1, 2022 · pp. 1–5 Read article
-
Improved Gasoline Yield from Fluid Catalytic Cracker Riser Reactor
Abstract: The study focused on improvement and conversion of vacuum gas oil as feedstock to fluid catalytic cracker riser reactor with enhanced yield of gasoline, liquefied petroleum gas and fuel gas products and low yield of coke as undesired product. Thus, steady state performance models were developed for riser reactor as a plug flow reactor using five lump kinetic scheme to study the cracking operations. Models were developed for the riser …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 3, 2022 · pp. 1–14 Read article
-
Nitrogen Fertilizer Rates and Spacing on Yield Components of Pepper Capsicum annum L. at Bure District, North Western Ethiopia
Abstract: Hot pepper is an important spice and vegetable crop in Ethiopia, but its productivity is low due to poor agronomic practices including inappropriate nutrient supply and poor inter-row spacing management. The experiment was carried out in the field in the year 2019/20 to know the effect of the rates of N fertilizer and spacing on the yield-attributed factors of pepper. The experiment consisted of factorial combinations on four levels of …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 3, 2022 · pp. 44–54 Read article
-
Preparation and Evaluation of Abaca and Pineapple Leaf Fiber Reinforced Hybrid Thermoplastic Composites
Abstract: Natural, biodegradable, and renewable materials are intended to take the place of synthetic ones in current research. Natural fiber composites are the subject of extensive research due to their special qualities and environmental friendliness. The fact that natural fibers are readily available, manageable, and biodegradable makes them advantageous. Evaluation of the changes in the mechanical properties of polypropylene reinforced with chopped pineapple leaf and abaca fiber is the objective of …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 3, 2022 · pp. 15–26 Read article
-
High-strength Indian Kaolin Development by Adding Vanadium Pentoxide (V2O5) by Sol-gel Method
Abstract: The development of high strength in Indian kaolinite has been studied in the presence of vanadium pentoxide. It is observed that the strength of Indian kaolinite is increased with addition of V2O5 by sol-gel techniques and characterized by Vickers hardness, X-ray diffraction and scanning electronmicroscopy studies. The kaolinite was compacted with different proportions of V2O5 additives and sintered at four different high temperatures. It was observed that V2O5 showed a …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 1, 2023 · pp. 28–32 Read article
-
Effect of Particle Size Mix Ratio of Adsorbent for AGO and PMS Adsorption: The Monitoring of Hydrocarbon Utilizing Bacteria in Water Media
Abstract: The effect of particle size mix ratio of clay and agro-based material of Plantain Ogoni Red (POR), Banana Native (BN), Banana Ogoni Red (BOR) and Plantain Agbagba 1 was monitored in AGO and PMS adsorption process based on formulated adsorbents. The characteristics of hydrocarbon utilizing bacteria was monitored in both salt and fresh wager media upon the effect of particle size and contaminants medium. Different particle size and contaminant medium. …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 3, 2023 · pp. 08–16 Read article
-
‘B’ash Concrete: Partial replacement of cement with Bagasse ash
Abstract: AbstractConcrete is an absolutely effective and essential construction material used all over the world because of it advantageous properties. But the increase in cost of cement and environmental pollution caused by cement manufacturing not only increase the cost of construction but also poses a serious threat to the environment. The utilization of industrial and agricultural waste produced by their processes has been used reduce waste for making economic, environmental, and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 7, Issue 3, 2017 · pp. 17–24 Read article
-
Progressive and Staged Analysis of RC Building Frame
Abstract: AbstractThe RC building frame is analyzed for gravity load as a complete space/plane frame using computer software. The Dead Load (DL) accumulates as construction work progresses. The analysis results obtained for partly built building frame differs from those obtained from complete frame analysis. The structural elements of partly built building frame may pass through critical stage when analyzed for DL and Construction Load (CL) acting on partly built building frame. …
Published in Journal of Construction Engineering, Technology & Management · Vol. 8, Issue 1, 2018 · pp. 15–19 Read article
-
Mechanical Properties of Aerated Concrete
Abstract: Nowadays it is very important to make the concrete economical. Aerated concrete is ordinary concrete that contains controlled amounts of air in the form of microscopic bubbles and having low density as compare to conventional concrete. These intentionally entrained air bubbles are extremely small. By using Air Entraining Agent (AEA), cement, coarse aggregate, fine aggregate and water we create aerated concrete. The experiment is perform on aerated concrete which is …
Published in Journal of Construction Engineering, Technology & Management · Vol. 8, Issue 3, 2018 · pp. 20–29 Read article
-
Performance of Polyster Fibre Reinforced Concrete
Abstract: The present work deals with the results of experimental investigations on Recron 3s Polyester fibre reinforced concrete. Effect of these fibres on various strengths of concrete are studied. Firstly 0.1% fiber content is used and after that varied from 0.2 to 1.8% at an interval of 0.2% by weight of cement. Various strengths considered for investigation are compressive strength, flexural strength, split tensile, bond strength and shear strength. Cube of …
Published in Journal of Construction Engineering, Technology & Management · Vol. 9, Issue 2, 2019 · pp. 37–46 Read article
-
A Study on Stress Block Parameters
Abstract: The compressive stress distribution in concrete, when mathematically modeled, can be defined by characteristic parameters known as stress block parameters. There are three such parameters, namely, shape factor, k1, depth factor, k2, and maximum stress factor, k3. There are various shapes of stress blocks, like parabolic, equivalent rectangular, equivalent triangular, and rectangular-parabolic. Various standard codes have adopted an equivalent rectangular stress block, whereas the Indian code has adopted rectangular-parabolic stress …
Published in Journal of Construction Engineering, Technology & Management · Vol. 9, Issue 3, 2019 · pp. 35–42 Read article
-
Study of Nano Additives in Concrete mix Proportioning Using Nano Particle
Abstract: This research literature reviews on nanomaterials in concrete. Now, the conventional concrete Properties of nanomaterial utilization have been introduced to various attentions to increase. Ultimately, as an introduction, the nanomaterial is increasing the strength and durability of the Concrete. The nanomaterial is described as the material that includes the particle size Less than 200 nm. While the investigation of Concrete in the importance of nanomaterials, the demand is at least …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 37–48 Read article
-
Strength and Durability of Concrete Cubes and Cylinders Wrapped with FRP
Abstract: Experimental were conduct on the distressed reinforced cement concrete compressive element and on the same after they have been retrofitted for rehabitation. Presently, FRP materials are also been started use in construction field in the form of wrapping to enhance the load carrying capacity, shear and flexural strength as well as ductility. This is an experiment based project which deals with strengthening and load deformation relationship of reinforced cement concrete. …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 3, 2020 · pp. 7–13 Read article
-
Effect of NaOH & Na2Sio3 on GGBS based Geopolymer Concrete
Abstract: This paper presents the experimental studies on the performance of comparison made by making Geopolymer Concrete (GPC) based on Ground Granulated Blast furnace slag (GGBS),using sodium hydroxide (NaOH )and sodium silicate (Na2Sio3) as alkaline activator. This study has proved that the by-product from iron industries, has the potential to produce cement free concrete, commonly known as Geopolymer concrete (GPC), blast furnace slag is gaining attention to be used as a …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 3, 2020 · pp. 21–45 Read article
-
Optimum Location of Shear Wall with Plan Irregularity of Multistoried Structure for Wind Analysis Using E-Tab
Abstract: Shear wall are used to elongate the strength and stiffness of structure, equal length and width of shear wall is maintained in the models, which are modeled in E-TAB software. In this chronicle, different irregular shapes “h” and “J” shapes are considered with different location of shear wall in it to see the structure in terms of reliability. The structure is 15 storied high which has height of 52 m …
Published in Journal of Construction Engineering, Technology & Management · Vol. 7, Issue 2, 2017 · pp. 7–11 Read article