Search
111 articles for “modulus reinforcement”
-
Multifunctional Corn Husk Fibre/PLA–PBAT Hybrid Composites with Carbon-Black Percolation for Structural Self-Sensing Applications
Abstract: This study developed multifunctional polymer composites based on a PLA/PBAT (Polylactic Acid/ Poly(butylene adipate-co-terephthalate)) thermoplastic matrix reinforced with 20 wt.% corn husk fibre (CHF) and functionalized with conductive carbon black (CB) for smart consumer-electronics casings. Alkali treatment modified the lignocellulosic fibre surface, improving fibre–matrix interfacial adhesion and stress transfer within the polymer composite. Thermal characterization showed that the PLA cold-crystallization temperature decreased from 112.5 °C for the unfilled blend to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Experimental Study on Effect of Recycled Epoxy Powder Reinforcement on Tensile Behavior of Acrylonitrile Butadiene Styrene
Abstract: Thermosetting plastic found wider application in the field of Aerospace, Aircraft, Wind Turbines, Marine and construction due to their long life, light weight and high strength. Among thermosets, epoxy is the major contributor. The world epoxy resin usage is almost 3.6 million tons in the year 2022 and it may cross 5.91 million tons by 2029. At their end of life most of it goes to land filling which leads …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 306–315 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Evaluation of Mechanical Properties of Glass Fibre and Carbon Fibre Reinforced Polymer Composite
Abstract: Abstract Fiber reinforced polymer composite materials are gradually substituting traditional metallic materials because of their high specific strength and better corrosion resistance. However, the cost of the composites is still higher than the traditional materials. Different fibers are used in polymer matrix composites. Glass and carbon fiber are one of the promising reinforcements in polymer matrix composites. In this project, a comparison of mechanical properties and erosion resistance has been …
Published in Journal of Communication Engineering & Systems · Vol. 8, Issue 2, 2018 · pp. 66–74 Read article
-
Epoxy Modified Bio-based Hyper branched Polyurethane/Clay Nanocomposites: Rheology and Biodegradability
Abstract: The rheological study of nanocomposite has significant contribution not only in processing but also reveals the dispersion state of the nano reinforcing agent in the matrix. This study divulges the rheological behavior of epoxy cured Mesua ferrea L. seed oil modified hyper branched polyurethane/clay nanocomposites. The influence of different preparative techniques viz. in situ and ex situ on the rheological properties was also investigated. The nanocomposites prepared by in situ …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 3, Issue 3, 2013 · pp. 1–12 Read article
-
Experimental Analysis and Predictive Modeling of Mechanical Behavior in Epoxy Composites Reinforced with Waste Tyre Rubber Particles
Abstract: The disposal of end-of-life tyres poses a significant environmental and resource challenge owing to their large volumes and non-biodegradable nature. In this work, we explore the incorporation of waste tyre rubber particles (WTRP) into an epoxy resin matrix to develop sustainable polymer composites and examine their mechanical behavior both experimentally and through predictive modelling. Composites with differing epoxy: WTRP ratios (80:20, 75:25, 70:30 wt.%) and varying rubber particle mesh sizes …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1754–1765 Read article
-
Effect of Nature of Short Fibers/Carbon Black on Curing Characteristics and Physico-Mechanical Properties of Ethylene Propylene Diene Monomer Rubber Composite
Abstract: AbstractIn this research work, ethylene propylene diene rubber (EPDM) composites were prepared by incorporating the various types of short fibers like cellulose, polyester, p-aramid, m-aramid, cotton short fibers and carbon black on a 2 roll mill. The effect of different short fibers content on the curing characteristics and physico-mechanical properties of EPDM composites were studied. When the loading of carbon black was fixed, it was found that carbon black content …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 34–43 Read article
-
Study on Preparation and Characterization of Ultrahigh Molecular Weight Polyethylene Nanocomposites Filled with ZnO Nanoparticles
Abstract: In order to create a completely flexible designed composite that makes it simpler to exhibit ideal mechanical and chemical properties, nano metal oxides are added to polymers as reinforcement. Polymer blends represent a crucial area in the management of innovative materials that outperform net polymers in terms of characteristics. Polymer mixes can provide components with lasting beneficial qualities, as opposed to what is possible with a single polymer equivalent. This …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 12, Issue 3, 2022 · pp. 1–11 Read article
-
Fabrication and Characterization of Jute Fiber Reinforced PP-Clay-based Nanocomposites
Abstract: AbstractNanocomposite is a new concept in the field of plastic-based composites. Jute fabric (hessian cloth)-reinforced polypropylene (PP) composites with different nanoclays were prepared by compression molding. Jute fiber content in the composites was approximately 50%. Mechanical properties of PP-clay blend and PP-clay/jute fiber composites were characterized. It was found that 5% clay containing PP-clay/jute composites showed the best results. Tensile strength (TS), elongation at break (EB) and tensile modulus (TM) …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 19–29 Read article
-
A Study on Tensile Characterization of Polypropylene Reinforced with Recycled Epoxy Particles
Abstract: Polypropylene is a thermo plastic, tensile properties of polypropylene are crucial in the real world applications as they determine structural integrity and durability. Epoxy is a thermosetting plastic finds applications in various fields like aerospace, automobile, food packing etc. A major concern is the disposal of epoxy composites after their service life, since most of the waste is sent to landfills, causing land pollution and soil infertility. In this experimental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 221–237 Read article
-
Exploring The Performance Dynamics of Basalt Fibre Reinforced Polymers: Mechanical and Viscoelastic Insights
Abstract: Basalt fibre reinforced polymer (BFRP) composites are gaining significant attention as sustainable alternatives to traditional reinforcement materials due to their superior mechanical performance, thermal stability, and eco-friendliness. This study examines the tensile, flexural, impact, and viscoelastic properties of BFRP composites fabricated via vacuum-assisted resin transfer molding (VARTM) using varying fibre volume fractions (20%, 30%, and 40%) and fibre orientations (unidirectional and bidirectional). The results reveal that composites with 40% fibre …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–22 Read article
-
Durability study of flyash induced polypropylene fiber reinforced concrete
Abstract: The need for sustainable and durable construction materials has led to the use of supplementary cementitious materials and synthetic fibers in concrete. The use of fly ash and polypropylene fibers (PPF) could improve the mechanical properties and durability of the concrete while also reducing the environmental impact of concrete production. Flyash and fibres are the recognised replacement which can add to the unique properties to the Portland cement, The use …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Polypropylene Fibres in Cementitious Composites: A Critical Review of Polymer Structure, Processing, Interfacial Behaviour and Performance
Abstract: Polypropylene (PP) fibres are widely used as secondary reinforcement in cementitious composites, yet their performance is governed as much by polymer structure and interfacial chemistry as by dosage. This review synthesises 50 primary sources (2003-2025, concentrated post-2015) to examine how PP molecular structure, fibre-manufacturing history, morphology, surface properties and environmental ageing govern fibre-matrix interaction and multiscale composite performance. Isotacticity, molecular weight, crystallinity and drawing ratio are shown to set the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Problems and Difficulties in the Additive Manufacturing of Composites with Carbon Fiber Reinforcement for Medical Application
Abstract: Amputation is more prevalent than one may think due to an accident, war, or disease. Prosthetics and associated orthotics have a combined global market value of $2.8 billion. Carbon fibre has found a market due to increased demand for foot prostheses. Fused deposition modeling (FDM) is a rapidly advancing three-dimensional (3D) printing technique. PEEK (polyether-ether-ketone) is a biocompatible, high-performance polymer that could potentially be utilised as an orthopedic surgery implant …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 8–12 Read article
-
Plant-Drive Natural Filler Filled Polypropylene Composites: Effects of Filler Treatment, Filler Content and Nanoclay on Properties
Abstract: In this study, PP was blended with nanoclay at three different loadings of 1, 3, and 5 wt%, while maleated polypropylene (PPM) was added at 5 wt%. The results showed that PP nanocomposites prepared at 5% PPM and 3% nanoclay showed optimum mechanical performance. In this research, untreated and chemically treated peanut shell flour (PSF) reinforced PP nanocomposites were prepared at four different loadings of 10, 20, 30, and 40 …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 2, 2022 · pp. 1–12 Read article
-
Generative Design of Bioactive Orthopedic Composites for Fracture Repair Using an Integrated Conditional GAN–Transformer Framework: A Multi-Objective Approach
Abstract: Orthopedic composite implants for fracture repair must simultaneously satisfy conflicting mechanical and biological demands: high fracture toughness, sufficient compressive stiffness, and bioactive surface chemistry enabling osteoblast adhesion and mineralization. Existing design approaches rely on trial-and-error experimentation, yielding sub-optimal trade-offs between these objectives. This paper presents an integrated conditional Generative Adversarial Network–Transformer (cGAN-T) framework for fully computational, multi-objective generative design of hydroxyapatite (HA)-reinforced polymer composite microstructures targeting Orthopedic fracture repair. A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 21–35 Read article
-
Design and Computational Analysis of Hybrid Carbon Fiber-Enhanced Metal Matrix Composite Spur Gears
Abstract: The automobile industry has to find the alternative solution for steel grade gears to overcome the weight to high strength ratio and thermal consideration with high damping properties. This study describes the design, FEM analysis, and performance evaluation of three new hybrid composite spur gears: a monolithic carbon fiber/epoxy (80/20 weight percent) composite (A), and two hybrids with steel (B) and aluminum (C) matrices (64% CF, 21% Epoxy, 15% metal). …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 158–172 Read article
-
Fabrication and Surface Modified Non-woven Calotropis gigantea Fiber Mat Reinforced Polypropylene Composites by Film Stacking Method
Abstract: Nowadays, there is a growing environmental consciousness and awareness about the need for sustainable development, which has led to growing interest in using natural fibers as reinforcement in polymer composites for synthetic fiber substitution. The current work deals with the effects of Calotropis gigantea fiber (CGF) content and chemical modification of CGF mats by treatment with sodium dodecyl sulfate (SDS) and SDS-pretreated benzoyl chloride on the fundamental properties of CGF-filled …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 10–22 Read article
-
STUDIES ON MECHANICAL, THERMAL AND PERMEATION PROPERTIES OF HDPE (BLOW GRADE) WITH MICROSILICA CLAY
Abstract: HDPE is widely used in container applications. The mechanical properties and barrier properties can be further improved by the addition of reinforcements like nanoclays. But, however the cost of nanoclays are higher about Rs.5000 – 6000/kg whereas micro silica cost is economical about Rs.450-1000/kg. Hence we used micro silica of 270nm particle size in this project with HDPE blow grade. HDPE (High density polyethylene) was melt blended with micro silica …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 41–53 Read article