Search
1019 articles for “IEEE802.11”
Nothing matched all of your words, so these match any of them.
-
Review of MB Lal Committee Recommendations for Petroleum Product Terminals
Abstract: AbstractThe IOCL Jaipur terminal fire and explosion on 29th of October 2009 led to 29 fatalities and amounted to a total monitory loss of $60 million. 60,000 KL of product was consumed in fire. The MB Lal committee was setup to analyse the incident and suggest various improvement measures to be undertaken to prevent such incidents in the country. The committee gave 118 recommendations. This review paper recollects the incident …
Published in Journal of Industrial Safety Engineering · Vol. 5, Issue 1, 2018 · pp. 44–48 Read article
-
Safety Index for Small Scale Manufacturing Industries in Punjab
Abstract: Safety index (SI) is a significant approach, utilized to monitor safety measures, ranking a problem and also helps in the decision-making process. In this paper, a new safety index has been developed for occupational safety of workers for small scale manufacturing industries (SSMI) of Punjab using well-known Delphi method and value of index is found to be 10.95. To check the validity of the factors, content validity index (CVI) is …
Published in Journal of Industrial Safety Engineering · Vol. 4, Issue 2, 2017 · pp. 19–26 Read article
-
Assessing and Ranking Health, Safety and Environmental Risks Through Analytical Network Process (ANP) Method in Cement Plant in 2020
Abstract: In today's competitive world, decision-making and management are based on risk assessment.Accordingly, the present study deals with assessing and managing the risks of Health, Safetyand Environment (HSE) aspects in cement factory through combining three widely usedmethods including FMEA, William and Fine, and EFMEA to determine and estimate the levelof risk, and to control and mitigate this risk using analytical network process (ANP) method.In this research, three ANP models were used …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 3, 2020 · pp. 23–35 Read article
-
An Approach for Discrete-Time Systems Design Using MPSM Continued Fraction Expansion Technique
Abstract: AbstractThis paper presents a new method for the design of the high-order discrete-time systems to overcome the limitations and drawbacks of some of the existing methods. It uses the Multi Point Squared-Magnitude Continued Fraction Expansion (MPSMCFE) and factorization technique for obtaining both denominator and numerator of the reduced order models. The method is extended for the design of high order systems using the reduced order model in place of original …
Published in Journal of Instrumentation Technology & Innovations · Vol. 7, Issue 3, 2017 · pp. 11–15 Read article
-
Performance Analysis of Induction Motor using DTC Technique
Abstract: AbstractDirect Torque Control is a control method used for high-performance torque control in AC drive systems. The standard DTC drive includes a couple of hysteresis comparators, a flux and torque estimator and a selection table for voltage vectors. Torque and flux are governed simultaneously by implementing appropriate voltage vectors, and de-coupling control of torque and flux can be accomplished by restricting these amounts within their hysteresis bands. The DTC requires …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 2, 2019 · pp. 11–18 Read article
-
ECG System based on ATMEGA 16 Microcontroller
Abstract: AbstractOur paper describes the electrocardiography (ECG) monitoring system based on ATMEGA 16 microcontroller. To detect R-peak detection and heart rate monitoring, the authors used ATMEGA 16 microcontroller with inbuilt analog-to-digital (ADC). Our device is low cost and portable, so that it can help in home monitoring of ECG data. The basic aim of our roject is the detection of abnormality or emergency condition, before they prove to be dangerous. ECG …
Published in Journal of Microcontroller Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 11–15 Read article
-
Design and Implementation of Smart Market Infrastructure
Abstract: AbstractIn today’s world, we cannot get real time status of available shops in our nearby market or market at distance, which leads to waste of time, money and resources. Therefore, we have introduced a novel idea of smart market infrastructures with reference to local market scenario of Indian subcontinent. The idea is about using available technologies efficiently which will help us in solving real life problems which are very much …
Published in Journal of Microcontroller Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 11–18 Read article
-
Detection of Fault and Protection of Faulted Distribution Feeder with Field Programmable Gate Array Using State Diagrams
Abstract: A hardware-efficient algorithm for fast fault-detection in feeders radiating out of a distribution substation and its subsequent clearance from the system for safe operation of the healthy parts has been presented in the paper. State diagrams used to design the circuit.The general purpose SPARTANE 3AN FPGA kit has been employed for developing the protective over-current relay. All the coding has been done using the hardware description language VERILOG. To avoid …
Published in Journal of Microcontroller Engineering and Applications · Vol. 2, Issue 2, 2015 · pp. 5–12 Read article
-
Analysis and Design of Coaxial Fed Microstrip Antenna on Multilayer substrate at Terahertz Frequency
Abstract: AbstractThe paper presents the performance of an antenna on a three-layered substrate material analyzed to enhance the electrical parameters such as bandwidth and gain of a microstrip antenna. A regular rectangular microstrip antenna design has been updated to a planar parabolic horn design for improving bandwidth to up to 30 times provided by a rectangular patch. The design has been simulated at 0.6 THz resonant frequency using Keysight’s ADS (Advanced …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 3, 2017 · pp. 11–14 Read article
-
Bendable Microstrip Antenna with Partial Ground for Textile Related Applications
Abstract: AbstractIn this article, the bendable microstrip antenna with the partial ground plane is proposed. The anticipated antenna is made of jeans substrate and applicable in the frequency range 1.90 GHz to 6.81 GHz with a bandwidth of 112.74 %. There is comparison reference antenna and anticipated antenna. The proposed bendable wearable antenna is used in the textile related application.Keywords: Bendable Microstrip Antenna, CST software, Jeans Substrate Cite this ArticleDeepa Rani, …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 17–21 Read article
-
Beveled Shaped Filtenna for Ultra Wideband Applications
Abstract: AbstractA compact microstrip line fed beveled shaped filtenna is presented for ultra-wideband application. It is intended to work in the frequency range of 3.10 to 11.75 GHz and having the size of 30.5× 25×1.6 mm3. The filtenna consists of a modified three resonators based band pass filter integrated into the feed line of the modified antenna. In addition to this, a modified semicircular like the ground plane is also present. …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 1–10 Read article
-
Wi-Fi Shaped Quad-band Microstrip Antenna for RF Energy Harvesting Applications
Abstract: AbstractIn this paper, author proposed a Wi-Fi shaped microstrip antenna for the RF energy harvesting applications. The proposed antenna is operating at the frequencies 0.9, 1.7, 1.9 & 2.4 GHz. The antenna radiates at the quad-band frequency having an application in GSM Band and Wi-Fi Bands. The antenna consists of four different strips which correspond to each frequency in the result. The co-axial probe is connected from the side of …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 11–19 Read article
-
Triangle Cut Circle Shape Bending Antenna for Wide Band Application
Abstract: In this article, an antenna has been simulated for the frequency range of 2.00 GHz to 13.00 GHz, i.e., wideband applications under simulation Software CST using bending material. This bending material is having very less dielectric constant of 1.7. For bending the antenna, Jeans material is used. The return loss of bending antenna is -26 dB at 3.837 GHz resonant frequency. Also, the loss tangent of the antenna is 0.025. …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 14–17 Read article
-
Network Analysis and Synthesis Through Graph Theory as a Tool
Abstract: AbstractAs time went on, the systems to be dealt with increased enormously in size and complexity. Simultaneously, there has been an evolution in combinatory and graph theory, which led to producing a number of highly efficient graph theoretic algorithms devised with an eye on economy in time and computer storage requirements. Because of space limitations the current review cannot deal with the whole spectrum of relevant topics and will try …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 3, 2019 · pp. 11–17 Read article
-
N-Shape Dielectric Resonator Antenna for Wireless Communication
Abstract: A new compact dielectric resonator antenna (DRA) for ultra-wideband (UWB) is presented and studied. This antenna is designed on FR4 substrate with dielectric constant of and overall size of proposed DR antenna is 20×35 mm2. The dielectric resonator of N-shape is only of 5.12 mm thickness and has a very low permittivity constant (10.2). The simulated DR antenna operating from 4.4 to 11.7 GHz covers most of the existing wireless …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 2, 2016 · pp. 13–18 Read article
-
Design of UWB Microwave Filter Using Quarter Wavelength Short-Circuited Stub
Abstract: UWB technology has progressed a lot in recent years for high speed wireless communications and other applications which need higher data rate and wider bandwidth. In this paper UWB bandpass filter is designed using quarter wavelength (λ0/4) short circuited stubs to improve the performance of UWB. Designed UWB filter gives higher performance and lower insertion loss in UWB spectrum. 5th order UWB bandpass filter is designed using CST MWS simulation …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 32–36 Read article
-
Pathloss and Coverage Analysis of FM Signals for Terrestrial Communication Design over Akure, Nigeria
Abstract: Accurate analysis of Free Space Loss (FSL) of electromagnetic radiations plays significant roles in the design and planning of terrestrial communication system at radio wave and microwave frequencies. Hence, it remains important to continuously evaluate the dependence of radio waves signal strength on the properties of the propagating medium. This work employed drive test technique and free space loss analysis of some Frequency-Modulated (FM) channels in Akure, Ondo State, Nigeria, …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 2, 2023 · pp. 8–21 Read article
-
Design and Implementation of UWB-MIMO Triangular Antenna with Notch Technology
Abstract: The paper proposes a quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation. The antenna comprises four triangular-shaped elements arranged orthogonally, printed on a low-cost FR-4 substrate with a dielectric constant of 4.4. Its dimensions are 50 × 50 × 1.6 mm³, and it operates within the frequency band of 2.97 to 11 GHz. To achieve high isolation of 22 dB between the four radiatingelements, a square …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 3, 2023 · pp. 8–15 Read article
-
Dependence of Adhesion Strength of Plasma Spray on Coating Surface Properties
Abstract: It is well known that thermal plasma spray coatings have diversified utilizations, but not vividly in use, mainly because of high cost of spray grade powder, for development of thick coating > 50 µm on metal substrates. Present investigation aims at depositing plasma spray coating on metals using low-cost/waste materials. A mixture of fly-ash + 20 weight percent of Quartz + 20 weight percent of illmenite is used for coating …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 57–64 Read article
-
Improvement of Mild Steel Surface Properties by Fly-ash + Quartz + Illmenite Composite Coating
Abstract: Plasma spray of fly-ash composite gives a stable improvement of surface properties for industrially used materials/equipments, which has become a major technological research area encompassing studies in a broad range from medical field, chemical field to ceramic field. In the present investigation, coatings are developed on mild steel substrates using fly-ash + quartz + illmenite composite (in a weight percentage ratio of 60:20:20) at various plasma torch input power levels …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 125–131 Read article