Search
1811 articles for “Carrying”
-
Performance Evaluation of a Tilted Single Axis Photovoltaic Tracking System under Different Weather Conditions
Abstract: AbstractExperimental studies were carried out using 37 W photovoltaic (PV) panels under different weather conditions over a prolonged duration of time to evaluate the performance of a low cost tilted single axis tracking system in comparison with a horizontal single axis tracking system and two fixed PV systems. A horizontal single axis PV panel tracker (HSAPVPT) and a tilted single axis PV panel tracker (TSAPVPT) were set up to compare …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 2, 2017 · pp. 45–55 Read article
-
Corrosion Characterization of Silicon Carbide and Fly Ash Particulates Dispersion Strengthened Aluminium 5083 Composites
Abstract: Corrosion behavior of aluminium metal matrix composites is a major study aimed at evaluating the potential of using the materials for aerospace components. Aluminium 5083 is a specific class of alloy which is known for its corrosion resistance in extreme environments and is used in aerospace components. However, the studies on effect of reinforcements such as silicon carbide and fly ash on corrosion behavior of aluminium 5083 alloy has not …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 2, 2017 · pp. 9–21 Read article
-
Role of Solid Acid Catalyst in Isopropylation Reaction
Abstract: Cumene synthesis was carried out by the reaction of benzene with isopropyl alcohol in the vapour phase over rare earth metal modified 13X zeolite. Zeolite modification was done by exchanging sodium ions of the zeolite with cerium ions to vary the acidity of the catalyst in the range of 0.25‑1.36 meq/g. The synthesis was carried out over a wide range of operating conditions. The synthesis conditions were optimized by studying …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 2, 2015 · pp. 19–26 Read article
-
Photo-Catalytic Degradation of Rhodamine-B by using UV/TiO2 and Nb2O5 Process: A Kinetic Study
Abstract: The photo-catalytic degradation of Rhodamine-B (RB) in aqueous solution with titanium dioxide (TiO2) and niobium pentaoxide (Nb2O5) as photocatalyst in slurry form has been carried out using UV-A light (254 nm). The effect of various parameters such as catalyst loading, pH and initial concentration of the RB dye on degradation have been determined. An attempt has been made to study the effect of process parameters through concentration of dye, amount …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 3, 2014 · pp. 12–24 Read article
-
EXTRACTION OF POWDER FROM SAPOTA (CHICKOO) FRUIT
Abstract: Nature has blessed us with a wonderful sweet fruit sapota which is commonly known as chickoo which has a sweet taste and which is liked by people of all ages. It is also a most popular fruit in Asia. It has Medicinal property due to chemical constituents such as polyphenol ascorbic acids, it can also be used in cosmetics. But the fruit sapota (chickoo) has very short shelf life because …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 1, 2019 · pp. 6–9 Read article
-
Performance Evaluation of H 2 SO 4 -Rice Husk-Moss Adsorbent for the Removal of Zn (II) Ion from the Effluent of Science Equipment Development Institute (SEDI)
Abstract: This research was carried out to investigate the potential of green algae (moss) with the support of H 2 SO 4 treated rice husk activated carbon using batch adsorption process for the removal of Zn (II) ions from SEDI industrial effluent. The rice husk- moss algae was activated using H 2 SO 4 . The effluent was characterized using atomic absorption spectrophotometer with initial concentration values of 12.3 mg/l for …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 1, 2022 · pp. 6–15 Read article
-
Performance based seismic design of reinforced concrete asymmetrical building
Abstract: The nonlinear static analysis of asymmetrical G+20 reinforced concrete building is carried out using design tool. Nowadays, in most of the RCC framed buildings irregularities are commonly observed. Buildings needing simple regular geometry suffer much less damage than buildings with irregular configuration. The poor performance and structural damages in an irregular building type of structures during the frequent earthquakes increased the need to determine and evaluate the damages in the …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 29–36 Read article
-
Reliability of Preliminary Cost Estimates of Educational Building Projects in a Developing Economy
Abstract: This study focused on the reliability of preliminary cost estimates of educational building projects in Nigeria with a view to providing more reliable cost estimates and reducing the number of abandoned educational building projects caused by faulty preliminary estimates. Using a case study approach, a total of 33 completed educational building projects were assessed and 31 construction professionals (Quantity Surveyors and Architects) formed the secondary population of the study. Data …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 3, 2016 · pp. 1–10 Read article
-
Understanding Quality in Construction
Abstract: Quality has transformed into a fundamental part of the construction project management industry. With creating competition between various private firms, quality control and quality assurance has grown to accomplish its significance in the construction industry. Quality administration has been inserted in as a part of the framework for quite a while now but still defects arise. This conflict arises due to difference in the management’s and the consumer’s perception of …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 3, 2016 · pp. 70–74 Read article
-
Analysis of Time and Cost Overruns in Road Project
Abstract: Management of the risk is the best approach during construction of road project, wherein numbers of unforeseen factors are involved. The project under consideration is the construction of 30 m wide road from Wadalagaon to Takligaon under the jurisdiction of Nashik Municipal Corporation. The road construction was started especially to cater the huge crowd likely to occur during Sinhastha Kumbha Mela, which comprises of laying of water supply, storm water …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 2, 2016 · pp. 52–57 Read article
-
Finite Element Modelling of Rollcrete Concrete Pavement
Abstract: The present study carried out to find the characteristic compressive Strength of Rollcrete (RCC) by using accelerated curing method so as to satisfy the required target mean strength in one day and comparing the same results with the normal curing strength at 28 days.Further, the study is undertaken to design of rollcrete pavements using finite element approach and evaluated the benefit of rollcrete pavement. Considering rutting as a failure criteria, …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 2, 2016 · pp. 62–66 Read article
-
Maintenance Management in Iraqi Government Buildings
Abstract: Due to the fact that the buildings in general and government buildings in particular, is considered as a national real estate wealth of high value, and to maintain these building, must carry out maintenance work to them. And the reality of the maintenance of government buildings in Iraq is not going according to the real system of management and lack of specialized cadres to carry out the tasks required in …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 2, 2016 · pp. 67–74 Read article
-
Tensile Capacity of Corroded Steel Section Strengthened Using Fiber Composite Wrap
Abstract: Strengthening and rehabilitation of structures is a major concern for researchers in the civil engineering community in recent years due to the aging of structures and the need for effective methods of strengthening. Many researches are being carried out on strengthening of reinforced concrete structures using fiber composite materials. A very few researches are being reported on strengthening of corroded steel members using fiber composite materials. Since corrosion is an …
Published in Journal of Construction Engineering, Technology & Management · Vol. 2, Issue 1-3, 2012 · pp. 54–65 Read article
-
Structural Analysis and Design of Prestressed Concrete Subway
Abstract: Subway is an underground tube which is used to carry underground roadway and railway systems within urban and suburban areas. To reduce the traffic volume above the ground underground Subway is used to connects many busy places through a common route. Many Metropolitan Cities in India are on the verge of getting saturated due to Urbanization therefore the Planning and Construction of such underground Subway is very much important in …
Published in Journal of Construction Engineering, Technology & Management · Vol. 11, Issue 3, 2021 · pp. 27–35 Read article
-
Real-Time Temperature Control System and Performance Exemplification with Conventional PID
Abstract: In process control industries, automatic controllers are introduced. PID (Proportional-Integral-Derivative) controllers are the work horses of many industrial controller applications. Significant research work has been carried out to improve the performance of closed loop response with a PID controller so that it can be used for real time temperature control system. Also performance of a PID controller is investigated for different performance metrics such as Integral Square Error (ISE), Integral …
Published in Journal of Control & Instrumentation · Vol. 6, Issue 1, 2015 · pp. 31–36 Read article
-
Implementing State Feedback Controller on Three-Tank Mixing Process
Abstract: This paper mainly focuses on the modeling and designing of state feedback with integral controller on three-tank mixing process. The main purpose of this paper is to compare the control performance between state feedback and PID controller that is designed with relay feedback method. The performance of the state feedback controller has been carried out and found satisfactory in terms of settling time, peak overshoot, rise time and overall performance. …
Published in Journal of Control & Instrumentation · Vol. 4, Issue 3, 2013 · pp. 1–6 Read article
-
Mechanical and Tribological Properties of Cr3C2-NiCr Coated Ti6Al4V Implant Alloy
Abstract: Ti6Al4V alloys are widely used in medical and aerospace applications due to their superior mechanical properties. But, Ti6Al4V alloys are poor in tribological properties such as wear. Poor wear resistance consequences in the formation of wear debris in human implants and leads to inflammation and pain. In this work, Cr3C2-NiCr coatings were applied to improve the mechanical properties such as tensile strength, hardness and tribological properties such as wear resistance. …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 3, 2017 · pp. 28–42 Read article
-
Isogeometric Topology Optimization of Continuum Structures using Evolutionary Algorithms
Abstract: Isogeometric analysis is a popular method for the analysis of problems involving complex geometry and governed by differential equations. Meta-heuristics are widely used to determine the optimum distribution of material within the given design domain. The focus of this study is to perform isogeometric topology optimization of continuum structures using meta-heuristics nature inspired firefly algorithm. NURBS basis functions are used to construct the geometric model and to calculate the displacements …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 3, 2017 · pp. 8–18 Read article
-
Design and Analysis of Single Angle Expanding Collets
Abstract: The subject of production deals with the use of fixtures that ensures repeatability to the work piece to be manufactured. The fixture is clamping device that mounts parts at a perfect location and gives stability, which leads to mass production. Thus types of clamping play a decisive role in getting the good reliability of the product. Collet is one of the clamping devices which have long slits around its periphery, …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 2, 2017 · pp. 1–12 Read article
-
Numerical Modeling of Elastoviscoplastic Material Model in Strain Space
Abstract: Conventional material non-linear analysis works with stress-space plasticity. It uses yield function, loading-unloading criteria, and flow rule in terms of stress parameters. It shows ambiguity in loading-unloading criteria for softening materials. During such situations, an alternative strain-space formulation becomes quite useful to carry out analysis of such materials. The viscoplastic response of materials requires the time integration of system of non-linear first order differential equations. In viscoplasiticy, the constitutive equation …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 1, 2018 · pp. 9–14 Read article