All articles
53 articles
-
Substitution of La3+ in Cu0.5Co0.5 LaxFe2-x O4 (x=0.02, 0.06) spinel ferrites improves the structural and dielectric Properties
Abstract: Nanosized Spinel ferrites with composition Cu0.5Co0.5 LaxFe2-x O4 (x=0.2, 0.6) synthesized by Sol-Gel auto Combustion method. The prepared sample was calcinated at 8000c for 4 hours. The substitution of La3+ effects the structural parameters, which is characterized by X-ray diffraction (XRD). The X-rd analysis shows that the crystallite size is 34.609 nm for 0.02 and 38.994 nm for 0.06 was calculated by using Debye-Scherrer’s formula. dislocation density shows at value …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 45–48 Read article
-
Gas Sensors Fabricated using Carbon Powder Derived from Dried Banana Peels Waste to detect Methanol, Ethanol, Acetone Vapors and Carbon Dioxide Gas
Abstract: Low cost and environmentally friendly activated carbon powder was synthesized using waste banana peels. Phosphoric acid was utilized as activation agent. Doctor blade method was employed to fabricate films of activated carbon on conductive or nonconductive glass substrates. Films were subsequently annealed at 70 0C for 30 minutes in air. According to XRD patterns, single phase of activated carbon was crystallized in thin film form. Carbon prepared from banana peels …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 14–25 Read article
-
Exploring the Luminescent Behavior of Dysprosium-Doped Halo-sulphate Compounds
Abstract: In essence, this study aims toward understanding the photo-luminescent properties of Dy³⁺ halogenated sulfates, viz., synthesis, characterization, and luminescent behavior of the materials. Dysprosium ions are introduced into the halo-sulfate matrices to investigate their suitability for solid-state lighting applications. The aim of the study is to explain the mechanisms of the photo luminescence of Dy³⁺ and study the influence of the doping concentration on luminescence efficiency and the thermal stability …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 01–06 Read article
-
Investigative Study of Relationship of Chemical Characteristics of Group V Elements and Electron Structure
Abstract: Understanding the chemical properties of Group V elements through their electron configurations deepens our comprehension of periodic trends. Transitioning from nitrogen to bismuth, we observe a shift from non-metals to metalloids and then to metals, a change driven by the progression of electron shell and orbital filling. This insight is crucial for forecasting and elucidating the varied chemical behaviors and uses of Group V elements, thereby aiding developments in chemistry …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 39–45 Read article
-
Hydrogenated Nitrile Butadiene Rubber (HNBR): A Comprehensive Review
Abstract: HNBR is produced by the hydrogenation of nitrile rubber (NBR) using either a homogeneous or heterogeneous technique. NBR is a copolymer of butadiene and acrylonitrile monomers. The hydrogenation process involves adding hydrogen to the nitrile butadiene copolymer, which results in improved resistance to heat, oxidation, and chemicals compared to NBR. This process alters the molecular structure of the rubber, providing it with superior properties compared to its unmodified counterpart, NBR. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 14–22 Read article
-
Design and Development of Mini-Groundnut Oil Extraction Machine for Domestic Purpose
Abstract: A machine is designed to extract various types of oil from groundnuts. The primary purpose of this machine is to facilitate the extraction of oil using a mechanical extraction method, specifically employing a screw press mechanism to crush the seeds and extract the oil. The design prioritizes portability, ease of use, and high extraction efficiency. It comprises several components, including the frame, hopper, gear reduction unit, pulleys, bearings, and power …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 31–38 Read article
-
Configuration and Properties of Group III Elements in the Periodic Table
Abstract: Group III elements comprise those found in the third column of the periodic table, including boron, aluminum, gallium, indium, and thallium. These elements possess three valence electrons in their outermost shell, characterized by the electron configuration ns2np1, which influences their location and characteristics within the periodic table. The distribution of electron pairs, formal charges, oxidation states, and molecular morphologies of Group III elements and their compounds are illustrated in this …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 23–30 Read article
-
Turning the Properties of Wastes Paper-Derived Cellulose Nanocrystals for Enhanced Erythromycin Adsorption
Abstract: This study explores the modification, characterization, and adsorption performance of waste paper-derived cellulose nanocrystals (CNCs) for the removal of erythromycin from aqueous solutions. CNCs were modified using organic acid, inorganic acid, and base treatments, and their structural changes were evaluated using FTIR, XRD, and BET analysis. FTIR confirmed the introduction of carboxyl and hydroxyl groups in acid-treated CNCs and deprotonation effects in base-treated CNCs. XRD analysis revealed that organic acid …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 1–24 Read article
-
Heat Transfer by Arc Welding for A Similar Material Joint
Abstract: Electric arc welding (EAW) is a traditional fabrication process used in wider domestic, commercial and industrial application. Welding is a joining of two materials with the application of heat at the molecular level with the application of heat and pressure. Many materials used for welding application for different joining process. Maraging steel is special steel used for production of different air-craft components. Maraging material is used for heavy tools, producing …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 1–13 Read article
-
A Review: Advancements and Applications of Investment Casting Technology in Aerospace Industries
Abstract: A conventional method for producing intricate and superior metal components is investment casting. It utilizes a wax pattern, a refractory shell, and molten metal to create a near-net-shape product. This method has been around for more than 5,000 years and is still relevant in various industries today, especially in aerospace. Investment casting, also known as lost-wax casting, is essential to the aerospace industry's ability to produce complex, high-performance parts. The …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 61–66 Read article
-
Synthesis and Applications of Copper- Doped Pyridine Precipitate
Abstract: A metal organic nonlinear optical single crystal, copper doped pyridine material, was created at room temperature using the slow evaporation solution growth technique (SEST). The developed material's crystalline nature was revealed by a powder X-ray diffraction (XRD) analysis. Single crystal XRD study shows that the material synthesized possesses monoclinic system of cell parameters, a = 11.44 Å, b = 7.92 Å, C = 11.74 Å and alpha and gamma is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 51–60 Read article
-
Concentrated Solar Energy in Iron Production: Towards Zero-Carbon Metallurgy
Abstract: Given the importance of environmental protection in modern societies, one of the objectives of industrial strategies in general and the metallurgical industries in particular is to find new, ecologically acceptable energy sources. One of these energy sources is solar energy, which, when properly concentrated, has a lot of promise for high temperature applications like those needed in metallurgical operations. In this work, we suggest using focused sun energy to make …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 01–10 Read article
-
Effect of Water Absorption on the Mechanical Properties of Oil Palm Empty Fruit Bunch (OPEFB) Reinforced Polymer Composite
Abstract: Natural fibres are progressively picking up attention as their applications are diversified into multiple industries which includes the automotive industry where lightweight materials are of utmost importance. The demand for natural fibre reinforced polymer matrix composites was nevermore as predominant as it is today. Oil palm empty fruit bunch (OPEFB) fibres are natural fibres and contribute to an eco-friendlier substitute when compared to synthetic fibres. These fibres are obtainable in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 11–26 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Plasma Gasification for Sustainable Waste Management: Challenges and Future Prospects
Abstract: Plasma gasification technology offers a promising solution for the sustainable disposal of municipal solid waste (MSW) by converting waste into energy or valuable products, aligning with the principles of the circular economy. Despite its potential, plasma gasification faces challenges in terms of high operational costs, energy demands, and limited commercialization success. This article critically evaluates plasma gasification alongside traditional MSW processing methods, including biological, hydrothermal, and thermochemical techniques, comparing their …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 01–05 Read article
-
Overview of Atomic Structure of Metals in Group 1 Elements
Abstract: This study discussed the basic atomic features of Group 1 elements—lithium, sodium, potassium, rubidium, cesium, and francium—by concentrating on their electronic configurations, atomic radii, and ionization energies. The article gives a thorough investigation of how these variables contribute to the chemical and physical characteristics of alkali metals. The data demonstrated that when the atomic number increases, the atomic radius likewise increases, whereas the ionization energy drops. These developments are ascribed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 6–13 Read article
-
Evaluation of Mechanical Properties of a Sustainable Bamboo Fiber Based Composite
Abstract: This research investigates the process of extracting and using both long and short bamboo fibers from the plentiful Dendrocalamus giganteus species. The fibers were extracted using a synergistic combination of mechanical and chemical methods, which proved to be the most efficient. The process included using an alkali solution and mechanical disintegration to generate superior long and short fibers. Subsequently, these fibers were used to manufacture composites by combining them with …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 20–30 Read article
-
Experimental Investigation of Aluminum Alloy 8010 by Friction Stir Welding
Abstract: A solid state welding method called friction stir welding (FSW) is used to fuse metals and alloys that are challenging to fuse using traditional fusion welding. The effects of tool pin and shoulder diameter on joining the aluminum alloy Al 8010 were examined in this study. The basis material for combining single butt-welded joints is a plate with a thickness of 6 mm. The welding was carried out on the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 14–19 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Hydrogen-based Steel Making - The future?
Abstract: The largest energy consumer i.e. 5% of global energy consumption and 7% of global CO2 emissions are produced by the iron and steel sector. The steel industry is a significant contributor to anthropogenic CO2 emissions, largely due to the use of carbon as a reducing agent in the production of virgin steel. The main cause of these emissions is the decrease in iron ore. While recycling scrap steel in electric …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 38–65 Read article