Journal of Materials & Metallurgical Engineering
Volume 16, Issue 1 (2026)
Table of contents
-
Experimental and Simulation Study on Reduction Kinetics of Magnetite Ore by using Hydrogen
Abstract: In the present work, magnetite ore fines pellets were prepared for a study of reduction kinetics using hydrogen gas. In the present work, various parameters are investigated to assess their influence on reduction kinetics with respect to hydrogen utilisation. The different input variables influence the process, yielding the reduction fraction. The effect of temperature on reduction kinetics with hydrogen flow rate was explored for the optimum value of these parameters. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 Read article
-
Turning the Properties of Wastes Paper-Derived Cellulose Nanocrystals for Enhanced Erythromycin Adsorption
Abstract: This study explores the modification, characterization, and adsorption performance of waste paper-derived cellulose nanocrystals (CNCs) for the removal of erythromycin from aqueous solutions. CNCs were modified using organic acid, inorganic acid, and base treatments, and their structural changes were evaluated using FTIR, XRD, and BET analysis. FTIR confirmed the introduction of carboxyl and hydroxyl groups in acid-treated CNCs and deprotonation effects in base-treated CNCs. XRD analysis revealed that organic acid …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 1–24 Read article
-
Surfactant-Mediated Synthesis and Stabilization of Colloidal Nanoparticles in Aqueous Media: A Preliminary Study on Controlling Parameters
Abstract: Surfactants dissolved in water possess a distinctive tendency to accumulate at surfaces or interfaces, a process that involves the migration of surfactant molecules from the bulk liquid phase to the interfacial region. This adsorption tendency of surfactants is being exploited in stabilization of the Nanoparticles (NPs) synthesized through colloidal chemistry routes. In present research, preliminary studies on controlling parameters involving various surfactants has been carried out to standardized the chemical …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 25–35 Read article
-
Monitoring The Hydrocarbon Utilizing Bacteria in Crude Oil Remediation Using Bio-Stimulant of Mint Leaf (Mentha Piperita)
Abstract: Conceptual monitoring of hydrocarbon utilization bacteria on crude oil remediation using bio-stimulant of mint leaf (Mentha piperita) was investigated. The bio-stimulant nutrient was determined by considering the available nitrogen, phosphorus, potassium, and hydrocarbon utilizing bacteria presence in both room and sun-dried samples of the remediant used. The mint leaf (Mentha piperita) was processed to obtain the powder form (nano particle size) of the bio-stimulant and the microbes isolated and identified …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 34–39 Read article
-
Analysis of Machine Learning in Metal Processing: A Novel Prospect
Abstract: Metal is processed by a wide range of procedures, from forming and casting to machining and riveting. Metal processing is a crucial part of modern manufacturing. The application of machine learning (ML) is driving a significant change in the sector, which has historically depended on empirical knowledge and trial-and-error techniques. Increased production, improved product quality, and resource optimization are expected outcomes of this action. This study aims to explore the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 40–51 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Sustainable Manufacturing: The Role of Additive Technologies in Waste Reduction
Abstract: Additive manufacturing (AM) is transforming modern manufacturing by significantly reducing material waste while enabling highly efficient production processes. Unlike conventional subtractive manufacturing methods—such as cutting, drilling, and milling—which remove excess material and generate large volumes of scrap, AM constructs objects layer by layer, depositing material only where required. This precise material placement minimizes waste generation and supports resource-efficient production, making AM a critical technology for sustainable industrial development. Beyond waste …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 62–70 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article