Trends in Mechanical Engineering & Technology
Optimization of Process Parameters for ABS, Nylon, Polypropylene Material in Injection Molding Using Taguchi Method
Abstract
The process of plastic injection molding (IMP) itself is a multifarious of time, temperature and pressure variables with a profusion of manufacturing defects that can occur without upright fusion of processing parameters and design components. Ascertaining the reform foremost process parameter settings commentative dominates productivity, quality, and costs of production in the plastic injection molding industry. Most plastic injection molding industries are using trial-and-error method/approximation method, based on experience of operator, to determine initial settings of machine and process parameters. In the present research work, methodology for estimating optimal set of process parameters to reduce cycle time of the process is reported. Melting temperature, injection pressure, cooling time, and holding temperature are chosen as process parameters. Taguchi L 27 Orthogonal Array is chosen is chosen as design of experimentation. Three different materials (ABS, nylon, and polypropylene) are selected for experimentation. Regression models are developed based on the S/N values of experimental results of cycle time. Analysis of variance is performed to check the adequacy of the results using Minitab 16. It can be revealed from the analysis that melting temperature for ABS material, and injection pressure for nylon and polypropylene material are significantly affecting the process parameters for IMP in specified condition. The result culminates the endorsed values of the parameters for IM for the framed component design. Defect anticipation coupled with least cycle time results in revamp of the process.Keywords
References (10)
- Kamaruddin, Zahid A. Khan and S.H. Foong. ‘’Application of Taguchi Method in the Optimization of Injection Moulding Parameters for Manufacturing Products from Plastic Blends.” IACSIT International Journal of Engineering and Technology, Vol.2, No.6, December 2010 PP 574-580
- N.A.Shuaib, M.F. Ghazali, Z. Shay full, M.Z.M. Zain, S.M. Nasir. “Warpage Factors Effectiveness of a Thin Shallow Injection-Molded Part using Taguchi Method International Journal of Engineering &Technology” IJET-IJENS Vol: 11 No: 01 PP 182-187.
- Chang T. and Faison E ‘’Optimization of Weld Line Quality in Injection Molding Using an Experimental Design Approach’’, Journal of Injection Moulding Technology, JUNE 1999, Vol. 3, No. 2 PP61-66. Trends in Mechanical Engineering & Technology Volume 11, Issue 3 ISSN: 2231-1793 (Online), ISSN: 2347-9965 (Print) © STM Journals 2021. All Rights Reserved 9
- K.R. Jamaludina, N. Muhamad, M.N. Ab. Rahman, S.Y.M. Amin, Murtadhahadi, M.H. Ismail “Injection molding parameter optimization using the Taguchi method for highest green strength for bimodal powder mixture with SS316L in PEG and PMMA, IEEE” 2006 PP 1-8.
- Marks Zhao Longzhi1, Chen Binghui1, Li Jianyun, Zhang Shangbing ‘’Optimization of Plastics Injection Molding Processing Parameters Based on the Minimization of Sink’’ IEEE 2010 PP 1-3
- Wen-Chin Chen Tung-Tsan Lai, Gong-Loung Fu ‘’A Systematic Optimization Approach in the MISO Plastic Injection Molding Process’’ IEEE 2008 PP 2741-2746.
- Barriere, TH, Liub, B, & Gelin, JC 2003, ‘Determination of the optimal process parameters in metal injection molding from experiments and numerical modeling’. Journal of Material Processing Technology, vol. 143-144, pp.636-644.
- "Injection and Compression Molding Fundamentals", Edited by A.I. Isayev, Marcel Dekker, Inc., New York, 1987, 703 pp.
- Lim SC, Ashby MF. Act Mater 1987; 30:1.
- Ross, P.J., 1996. Taguchi Techniques for Quality Engineering, 2nd edition. McGraw–Hill, New York.