Recent Trends in Civil Engineering & Technology
Volume 7, Issue 3 (2017)
Published
Table of contents
-
Effect of Corrosion on Flexural Strength of Reinforced Concrete Beam: An Experimental Study
Abstract: AbstractThe main aim of this experimental study is to investigate the effect of corrosion on reinforced concrete beams, particularly on load deflection behavior, load carrying capacity and crack width by using with or without epoxy coating on the steel surface. Accelerated corrosion technique was adopted to corrode the beam experimentally. The corrosion was measured using the Open Circuit Potential (OCP) measurement instrument. A total of 14 simply supported beam specimens …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 1–7 Read article
-
Bacterial Concrete: Innovative Way to Enhance Concrete Properties
Abstract: AbstractConcrete is an absolutely essential component of construction materials used in infrastructure and most buildings. Despite its versatility in construction, it is known to have several limitations. Based on the continuous research carried out around the globe, various modifications have been made from time to time to overcome the deficiencies of cement concrete. Recent research has shown that bacteria produces a metabolic product due to biological processes, this novel emerging …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 14–20 Read article
-
Seismic Behavior of RC Elevated Water Tank under the Impact of Liquid Sloshing
Abstract: AbstractIn the present study, a reinforced concrete elevated water tank with a capacity of 500 m3 and h/d ratio=0.7 is considered. The present study investigates the performance of elevated water tank considering the impact of liquid sloshing for partially filled tank i.e. half tank condition. The investigation is carried out by considering different staging arrangement such as cross staging and radial staging. By considering all these parameters, total six models …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 21–30 Read article
-
Durability and Non Destructive Test of Hybrid Fibre Reinforced Concrete
Abstract: AbstractAim: This paper presents the strength and performances of steel fibre reinforced concrete (SFRC) and hybrid fibre reinforced concrete (HFRC). The hybrid fibre is considered in the combination of hooked end steel fibres and polypropylenes fibres. Method: To study the durability properties, the fibre content dosage V f ranged from 0.5 to 2.0% of steel fibres, and 0.8SF0.3PP, 0.7SF0.3PP, 0.6SF0.4PP, 0.5SF0.5PP of hybrid fibres. 10 mixes including one control mix …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 31–45 Read article
-
Experimental Study on Micro Silica Amalgamated High Performance Concrete
Abstract: AbstractIn this paper, an endeavour has been made to swot the effect of micro silica (MS) or silicafume with partial replacement of cement (i.e., 0, 5, 10, 15, 20 and 25%) and also with fullreplacement of natural sand by crusher wash sand (CWS) on strength and durabilityproperties for high performance concrete (HPC) of M50 grade with water cement ratio as0.30. Test results indicate that, the use of MS has improved …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 46–52 Read article
-
Waste Plants as a Green inhibitor for Reinforced Concrete
Abstract: AbstractIn recent years, the use of inhibitors in producing high performance concrete has increased significantly as a result of chloride and sulfate attacks. The present inhibitors in market are toxic to the environment. Hence, the objective of the present investigation was to study a novel, eco-friendly and a hydrophobic green plant extracts’ inhibitor (rice husks) and study the effects of it on compression strength of reinforced concrete. The inhibitor above …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 53–58 Read article
-
Partial Replacement of Cement by Kota Stone Slurry in Mortar
Abstract: AbstractKota stone is one of the lime stones which is found in Kota, Jhalawar, and Chittor districts of Rajasthan. It is a very fine-grained siliceous calcium carbonate rock of sedimentary nature. During cutting and polishing process, a lot of material remains unused, and this waste may be called as Kota stone cutting and polishing waste. The disposal of Kota Stone Slurry (KSS) from the Kota stone industry is one of …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 8–13 Read article