Journal of Materials & Metallurgical Engineering
Volume 12, Issue 3 (2022)
Published
Table of contents
-
Reliability Analysis of Lube Oil in a Generator
Abstract: In this research work, we considered the best or better practices of maintaining lube oil balance in generator set by adopting a reliability analysis method. It was established that the running of the generator set for a long time and the heaviness of the appliances switched on upon the generator has been investigated to be a contributing factor for the reduction in the quality of the lube oil which influences …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 1–8 Read article
-
The Role of Surface Treatments on Mechanical and Interfacial Shear Strength of Pineapple Leaf Fibers
Abstract: Natural fibers are seen as having potential application as reinforcing agents in polymer composite materials due to their main advantages, which include moderate strength and stiffness, low cost, and being an environmentally beneficial, degradable, and renewable material. They are susceptible to absorbing moisture because of their innate hydrophilicity, which can weaken or plasticize the adherence of the fibers to the surrounding matrix and impact the performance of composite materials employed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 18–28 Read article
-
Determination of Selected Essential (Copper, Zinc) and Non-essential (Lead, Chromium, Cadmium) Heavy Metals in Some Single-use Plastics from Sokoto Metropolis, Nigeria
Abstract: Background and objectives: The objective of this study is to conduct Atomic Absorption Spectroscopy Analysis of selected essential (Cu, and Zn) and non-essential heavy metals (Cr, Cd, and Pb) in selected different single-use plastics that are in contact with food from Sokoto, Nigeria. Methods: The levels/concentrations of heavy metals in plastics were determined using atomic absorption spectroscopy. Findings: Copper levels range of 0.05000.001 to 0.90100.001 (ppm), while zinc levels are …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 29–37 Read article
-
Adoption of Heat Recovery Technology in Sintering Process to Reduce Carbon Imprint
Abstract: India is the second largest steel producer in the world after China. The 2017 National Steel Policy of India set out the ambitious plan of 250 MT steel production and per capita consumption to around 160 kg by 2030. The dominant iron-making route is blast furnace (BF), which is an energy-intensive process based on fossil fuel consumption. The steel industry contributes around 7% of all greenhouse gas (GHG) emissions. India …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 38–44 Read article
-
Computational Modeling on Behavior of Annular Stone Column with Variation of Parameters in Stratified Soils
Abstract: Many studies made reports on the soft soil improvement by the application of stone columns.Ordinary stone columns are installed by vibro-replacement method in the field to be get compacted. The material requirement will be based on diameter of column and encasement around the column can be provided to get more loading ability. In this study, the modification of stone column by changing its structure from solid stone column to hollow …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 9–17 Read article