Journal of Catalyst & Catalysis
Volume 6, Issue 2 (2019)
Published
Table of contents
-
Inhibitors for steel implements
Abstract: Oil and gas industries use corrosion inhibitors made of active inhibitor intermediate, carboxylic acid, demulsifier and surfactant in aromatic solvent, and alcohol. High pressure and high temperature oil well flow lines are made of steel pipes. These pipes are prone to corrosion from gaseous contamination, oil quality, flow rate, developed shear stress of turbulence, pump spar techniques, etc. Carbon dioxide to carbolic acid conversion at below 100oC temperature appears to …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 1–11 Read article
-
Inhibitors of steel corrosion sector
Abstract: Inhibitor application in medium of exposure is to mitigate corrosion of mild steel. In industrial and ambient weather corrosions is either from acidic medium or soil compositions. Most of inhibitors appear to be green in origin i.e. environmentally friendly. These explorations account to prevent usage of toxic and high cost synthetic inhibitors. Comparative behaviors about inhibition efficiency restrain a long list of organic natural inhibitors to that of synthetic inorganic …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 12–22 Read article
-
Steel inhibitors of gas well steels
Abstract: Corrosion inhibitor is chemical compound or substance that, when added in small concentration to an environment, effectively decreases the corrosion rate. Multiphase oil and gas well flowlines at subsea has studied to corrode by contamination of CO2 gas at different temperature, partial pressure, velocity of flow and properties of scale formed at inner wall. Irrecoverable localized corrosions cause failure of structures those are beyond effects of corrosion inhibitors. Pollution of …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 23–33 Read article
-
Production of liquid fuel from waste plastic using batch catalytic pyrolysis process
Abstract: Waste polystyrene from households and retailing shops are recognized to be the major sources of environmental problem. On the other hand, it represents a source of energy and valuable chemical products. Pyrolysis as a technique of chemical recycling of waste plastic is as an environmentally and economically acceptable option for converting waste plastics into useful resources. In this study, the operating conditions studied were; temperature was varied from 430 to …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 34–43 Read article
-
Effect of PMMA Micropillars on the Surface-Driven Capillary Flow of Dyed Aqueous Isopropyl Alcohol in PMMA Microfluidic Devices
Abstract: In this work, dyed aqueous isopropyl alcohol [60% isopropyl alcohol (IPA), 40% dyed water] is prepared as the working liquid. The effect of surface modification on the microfluidic flow of aqueous isopropyl alcohol (IPA) is studied in the polymethylmethacrylate (PMMA) microfluidic devices. The effect of surface area to volume ratio on microfluidic flow of aqueous isopropyl alcohol is also studied. The effect of microfluidic friction on microfluidic flow of aqueous …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 44–47 Read article